Inactive

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announce... This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as a request for quotation (RFQ) IAW FAR Part 13. The government intends to award a firm-fixed price (FFP) contract for a one-time purchase of one (1) Advance Microwave Mapping Probe (AMMP) to include delivery. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2021-02, Defense Federal Acquisition Regulation Supplement Change Notice (DPN) 20201130, and Air Force Acquisition Circular (AFAC) 2019-1001. The Air Force Sustainment Center (AFSC/PZIMA) at Tinker Air Force Base Oklahoma, intends to award one firm fixed price contract, for the acquisition of material listed below. This is other than full and open competition acquisition. The NAICS Code is 334511 and the Size Standard: 1,250 CONTACT INFORMATION: Quotations are due by: 20 Dec 2022, by 03:00pm Central Standard Time (CST). Contact the following for any additional questions regarding this solicitation: Riley Gentry, Contracting Specialist, 405-641-8070 Darla DeAngelis, Contracting Officer, 405-996-0819 Please email quotes to: riley.gentry@us.af.mil AND darla.deangelis@us.af.mil CONTRACT LINE ITEMS (CLINS): CLIN PART NUMBER/NOUN QUANTITY UNIT OF ISSUE DELIVERY DATE 0001 • Hand Held • Small and Large Diameter Spacers • 7” long wide band spot probe (2.5 – 20 GHz) • Copper Mountain RP180-054 Vector Reflectometer Ruggedized to protect from water and dust • Storage Case • User Manual • CTGcalc (Compass Tchnology Group Calc) HandHeld single license 1 DESCRIPTION OF ITEMS: USAF request the purchase of one (1) each, Hand Held Advance Microwave Mapping Probe (AMMP) to include delivery. DELIVERY INFORMATION: FOB Destination to Tinker AFB, OK 73145. Shipping must be included in price. Net 30. The contractor shall deliver all items described above to: OC-ALC/OBC AF BPN NO MILLSBILLS PROCESSES 3001 STAFF DR DOOR G70 POST N68 TINKER AFB, OK 73145-3303 TERMS AND CONDITIONS Please note provisions by reference carry the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available. The full text of a clause may be accessed electronically at this/these address: Regulations URLs: (Click on the appropriate regulation.) https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/dfars https://www.acquisition.gov/affars FAR 52.212-1 - Instructions to Offerors – Instructions to Offerors -- Commercial, applies to this acquisition. Addendum to FAR 52.212-1 Instructions to Offerors -- Commercial Items General Information: The Government plans to issue a one-time purchase of one-time purchase of one (1) Advance Microwave Mapping Probe (AMMP) to include delivery. This firm-fixed-price type contract is to award one contract for the acquisition. The Contracting Officer (CO) is the sole point of contact for this acquisition. Address any questions or concerns you may have to the CO. Written requests for clarification may be sent to the CO at the address located in block xvi An Ombudsman has been appointed to hear concerns from interested vendors during the proposal development phase of this acquisition. The Ombudsman for this acquisition is AFSC/PZC. This does not diminish the authority of the program director or CO, but communicates vendor concerns, issues, disagreements and recommendations to the appropriate Government personnel. When requested, the Ombudsman shall maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of quotations; interested parties are invited to call AFSC/PZC at 405-736-3273. General Instructions: This acquisition will be conducted under the procedures of FAR Part 12 -- Commercial Items and FAR Part 13 -- Simplified Acquisition Procedures. This acquisition will utilize price as the only evaluated factor. Award will be made to the vendor with the lowest total evaluated price (TEP) and whose quote conforms to the solicitation requirements (to include all stated terms, conditions, representations, and certifications). Vendors shall complete provisions/clauses as required. Vendors must complete the annual representations and certifications electronically via the System for Award Management (SAM) at https://www.sam.gov. After reviewing the SAM information, the vendor verifies by submission of their quotation that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications - Commercial Items, are correct. Tailored Instructions (FAR 52.212-1): North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block IV of the solicitation cover sheet of this solicitation. However, the small business size standard for a concern which submits a quotation in its own name, but which proposes to furnish an item which it did not itself manufacture, is 1,250 employees. (b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations may be submitted on the solicitation, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotations must show— (1) The solicitation number; (2) The time specified in the solicitation for receipt of quotations; (3) The name, address, and telephone number of the vendor; (4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) “Remit to” address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the vendor shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Reserved; and (11) If the quotation is not submitted on a Standard Form (SF) 1449, Solicitation/Contract/Order for Commercial Items, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotations that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. I Reserved. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing. I Multiple quotations. Vendors are encouraged to submit multiple quotations presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation), or alternative commercial items for satisfying the requirements of this solicitation. Each quotation submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of quotations. We must receive your quotation at the address specified in Block xvi by the deadline specified in Block xv. We will not consider any quotation that we receive after the deadline unless we receive it before we issue a purchase order and considering it will not unduly delay our purchase. In case of an emergency that delays our operations and makes submission or receipt of your quotation impossible, we will extend the deadline by one working day. (g) Issuance of purchase order. The Government intends to evaluate quotations and issue a purchase order without interchanges. Therefore, the vendor’s initial quotation should contain the vendor’s best terms from a price and technical standpoint. However, the Government reserves the right to conduct interchanges with one, some, or all vendors if later determined by the Contracting Officer to be necessary. The Government may waive informalities and minor irregularities in quotations received. The Government reserves the right to reject any or all quotations, if such action is in the public interest. (h) Multiple purchase orders. The Government may issue purchase orders for any item or group of items of a quotation, unless the vendor qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit price(s) quoted, unless the vendor specifies otherwise in the quotation. (i) Availability of requirements documents cited in the solicitation. If the descriptions in this solicitation refer to any Government specification, standard, or commercial item description, you may obtain a copy of any such documents from the places listed in FAR 52.212-1, paragraph (i). (j) Unique Entity Identifier (UEI). Applies to all quotations submitted in response to solicitations that require the vendor to be registered in the System for Award Management (SAM) database. Place your UEI that identifies the vendor’s name and address in Block “DUNS” Also, if applicable, place your Electronic Funds Transfer (EFT) indicator in Block “DUNS”. If you do not have a UEI, see FAR 52.212-1 paragraph (j) for instructions. (k) Reserved. (l) Reserved. Addendum to FAR 52.212-2 -- Evaluation – Commercial Items 1.0 Basis for Contract Award: This acquisition will be conducted under the procedures of FAR Part 12 -- Commercial Items and FAR Part 13 -- Simplified Acquisition Procedures. This acquisition will utilize price as the only evaluated factor. Award will be made to the vendor with the lowest total evaluated price (TEP) and whose quotation conforms to the solicitation requirements (to include all stated terms, conditions, representations, and certifications). The Government intends to award without interchanges. However, the Government reserves the right to conduct interchanges if determined necessary by the Contracting Officer (ref. FAR 52.212-2 Addendum, section 1.3). 1.1 Solicitation Requirements (Terms and Conditions) Vendors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and Statement of Work (SOW)/Item Description requirements, in addition to the price factor. Failure to comply with the terms and conditions of the solicitation may result in the vendor being ineligible for award. Vendors must clearly identify any exception to the solicitation terms and conditions and must provide complete supporting rationale. The Government reserves the right to determine any such exceptions unacceptable, and the quotation, therefore, ineligible for award. 1.2 Number of Contracts to be Awarded: The Government intends to select one contractor for this acquisition. However, the Government reserves the right not to award a contract at all, depending on the quality of the quotation, prices submitted, and the availability of funds. 1.3 Interchanges In accordance with FAR 1.102-2(c)(3) the Government shall exercise discretion, use sound business judgement, and comply with applicable laws and regulations during the course of this acquisition. The Government intends to award without interchanges, but reserves the right to conduct interchanges if necessary. Therefore, it is imperative that vendors submit their best terms initially. If during the evaluation of quotations it is determined to be in the best interest of the Government to conduct interchanges, the Contracting Officer may conduct interchanges with one, some, or all vendors before issuing any purchase order. Interchanges are information sharing between the Government and vendors after receipt of quotations which can be conducted to address any aspect of the quotation. Interchanges may be oral or written. Written interchanges take the form of Interchange Notices (IN)s. INs are used to accurately capture contemporaneous sharing of information. If interchanges are conducted, the Government may request final quotation revisions at the conclusion of interchanges. 52.212-3 - Offeror Representations and Certifications -- Commercial Item The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the contractor is affirming that the current SAM registration is current, accurate, and complete). If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision. 52.212-4 - Contract Terms and Conditions -- Commercial Items, applies to this acquisition. 52.212-4 - Addendum -- (a) The Contractor agrees that the supplies or services furnished under this contract shall be covered by the most favorable commercial warranties the Contractor gives to any customer for such supplies or services and that the rights and remedies provided herein are in addition to and do not limit any rights afforded to the Government by any other clause of this contract. (b) The Contractor shall provide a copy of the applicable commercial warranty with each item covered by such a warranty, at no additional cost to the Government. A copy of the warranty proposed shall be provided with the offer. 52.212-5 - Contract Terms and Conditions Required to Implement Statues or Executive Orders—Commercial Items, applies to this acquisition. The following clauses/provisions within 52.212-5 are included but not limited to: 52.204-10 - Reporting Executive Compensation and First-Tier Subcontract 52.209-6 - Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-6 - Notice of Total Small Business Set-Aside 52.219-28 - Post Award Small Business Program Representation 52.222-3 - Convict Labor 52.222-19 - Child Labor—Cooperation with Authorities and Remedies 52.222-21 - Prohibition of Segregated Facilities 52.222-26 - Equal Opportunity 52.222-36 - Equal Opportunity for Workers with Disabilities 52.222-50 - Combating Trafficking in Persons 52.223-18 - Encouraging Contractor Policies to Ban Text Messaging While 52.225-1 - Buy American—Supplies 52.225-13 - Restrictions on Certain Foreign Purchases 52.225-18 - Place of Manufacture 52.232-33 - Payments by Electronic Funds Transfer The following FAR clauses/provisions are included but not limited to: 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions 52.203-12, Limitation on Payments to Influence Certain Federal Transactions 52.203-18 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation. 52.203-19 - Prohibition on Requiring Certain Internal Confidentiality Agreement or Statements. 52.204-7 - System for Award Management 52.204-13 - System for Award Management Maintenance 52.204-16 - Commercial and Government Entity Code Reporting 52.204-17 - Ownership or Control of Offeror 52.204-18 - Commercial and Government Entity Code Maintenance 52.204-19 - Incorporation by Reference of Representations and Certifications 52.204-20 - Predecessor of Offeror 52.209-2 - Prohibition on Contracting with Inverted Domestic Corporations—Representation 52.209-10 - Prohibition on Contracting with Inverted Domestic Corporations Felony Conviction under any Federal Law 52.212-1 - Instructions to Offerors -- Commercial Items 52.219-1 - Small Business Program Representations Alternate I 52.222-22 - Previous Contracts and Compliance Reports 52.222-25 - Affirmative Action Compliance 52.223-22 - Public Disclosure of Greenhouse Gas Emissions and Reduction Goals— Representation 52.225-25 - Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certifications 52.232-39 - Unenforceability of Unauthorized Obligations 52.232-40 - Providing Accelerated Payments to Small Business Subcontractors 52.252-1 - Solicitation Provisions incorporated By Reference 52.252-2 - Clauses Incorporated by Reference 52.242-15 – Stop Work Order 52.247-34 - F.o.b. – Destination 52.252-5 - Authorized Deviations in Provisions 52.252-6 - Authorized Deviations in Clauses 52.253-1 - Computer Generated Forms The following DFARS clauses/provisions are included but not limited to: 252.203-7000 - Requirements Relating to Compensation of Former DoD Officials 252.203-7002 - Requirement to Inform Employees of Whistleblower Rights 252.203-7005 - Representation Relating to Compensation of Former DoD Officials 252.204-7003 - Control of Government Personnel Work Product 252.204-7008 - Compliance with Safeguarding Covered Defense Information Controls 252.204-7012 - Safeguarding Covered Defense Information and Cyber Incident Reporting 252.204-7015 - Notice of Authorized Disclosure of Information for Litigation Support 252.209-7999 - Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.211-7003 - Item Unique Identification and Valuation 252.223-7008 - Prohibition of Hexavalent Chromium 252.225-7001 - Buy American and Balance of Payments Program 252.225-7002 - Restrictions on food, clothing, fabrics, hand or measuring tools, and flags 252.225-7021 - Trade Agreements 252.225-7048 - Export-Controlled Items 252.232-7003 - Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 - Wide Area Workflow Payment Instructions 252.232-7010 - Levies on Contract Payments 252.243-7001 - Pricing of Contract Modifications 252.244-7000 - Subcontracts for Commercial Items 252.247-7023 - Transportation of Supplies by Sea 252.247-7036 - Buy American—Free Trade Agreements—Balance of Payments Program, Alt. 1 The following AFFARS clauses/provisions are included: 5352.201-9101 - Ombudsman 5352.223-9000 - Elimination of Use of Class I Ozone Substances The following Local clauses are included: Contract Holidays Truck Entry Gate, Notice List of Attachments Quotes must include the response page, attached on the last page of this document. Contact Information Quotations are due by: 20 Dec 2022, by 03:00pm Central Standard Time (CST). Contact the following individuals for information regarding this solicitation: Darla DeAngelis, Contracting Officer, 405-996-0819 darla.deangelis@us.af.mil Attachments: C22-055 Hand Held AMMP Item Description