Inactive Total Small Business Set-Aside (FAR 19.5)

Please see attached documents. The purpose of Amendment 0001 is to correct delivery dates and to extend the closing date for quotes from 12-5 to 12-7.

Inactive Total Small Business Set-Aside (FAR 19.5)

The Air Force intends to solicit for the following commodity: The 76th AMXG is requesting the utilization of funds for the purchase of 440 gallons of MIL-PRF-85285 Type IV, Fed-Std-595 Gray Color #165... The Air Force intends to solicit for the following commodity: The 76th AMXG is requesting the utilization of funds for the purchase of 440 gallons of MIL-PRF-85285 Type IV, Fed-Std-595 Gray Color #16515 in accordance with (IAW) Technical Order (TO) 1E-3A-23. The requested description/specifications are outlined below: The MIL-PRF-85285 Type IV, Fed-Std-595 Gray Color #16515 shall be one (1) of the following Brand Name kits: Sherwin-Williams Company, 2.5 Gallon Kit Each kit shall include the following material: One (1) gallon of base (PN: F94A4216) One (1) gallon of curing agent (PN: CMO844H01) One (1) quart of reducer (PN: CMO844AR4) Quantity: 176 kits (440 gallons) Delivery: Two (2) shipments of 88 kits PRC – Desoto International, Inc. PPG Aerospace, 4 Gallon Kit Each kit shall include the following material: Two (2) gallon of base (PN: CA9800/F16515) One (1) gallon curing solution (PN: CA9800Z) One (1) gallon thinner (PN: CA9800CT1) Quantity: 110 kits (440 gallons) Delivery: Two (2) shipments of 55 kits Hentzen Coatings, Inc., 2 Gallon Kit Each kit shall include the following material: One (1) gallon (PN: 35565APX) One (1) gallon (PN: 35503CMU) Quantity: 220 kits (440 gallons) Delivery: Two (2) shipments of 110 kits Total quantity of material shall be divided in half equally with the first half being shipped no later than January 9, 2023 and the second half being shipped no later than June 5, 2023. The MIL-PRF-85285 Type IV, Fed-Std-595 Gray Color #16515 paint kits shall meet the following specifications: Product shall have a minimum of 80% shelf life at the time of delivery. Each shipment shall be all the same Lot Number, all the same Batch Number. Upon delivery the Contractor shall provide verification and documentation that product(s) are of the same Lot and Batch numbers on a certificate of conformance. Contractor shall ensure product(s) are from the same Lot and Batch numbers to prevent color issues. Contractor shall ensure there are no mixing variations. Contractor shall provide safety data sheets (SDS) and all safety information and documentation required by national safety standards and regulations. Contractor shall provided, upon delivery, a chemical inventory. A list (or inventory) of all known hazardous chemicals in the delivery shall be included. The list shall be cross-referenced with the SDSs and shall be kept with this program and SDSs to serve as an index to help employees identify and locate necessary information. Contractor shall provide all related safety, health, and environmental regulations specific for the product that is not indicated anywhere else on the SDS. The information may include any national and/or regional regulatory information of the chemical mixtures (including any OSHA, Department of Transportation, Environmental Protection Agency, or Consumer Product Safety Commission regulations). Contractor shall inspect each product, prior to issuing and delivery, for damage or defects; and ensure that the product has been properly accounted for and listed on the delivery report. Contractor shall provide information upon delivery of product of all potential chemical hazards that may be encountered in the use of the product. A Firm Fixed Price type contract is contemplated. Estimated Period of Performance: 45 days ARO This is a small business set aside. System for Award Management (SAM) is required to receive any award. Contractors can register electronically at https://www.sam.gov/portal/public/SAM/. The NAICS code for this requirement is 325510 with a size standard of 1000 EMP. Interested persons may identify their interest and capability to respond to the requirement by submitting a proposal. Electronic procedures will be used for this solicitation through SAM.gov at https://sam.gov/content/home. No telephone requests. See Note 22. Authority is 10 USC 2304 (c)(1). For further information contact: Shannon Reed Contracting Specialist shannon.reed.8@us.af.mil