Inactive Total Small Business Set-Aside (FAR 19.5)

This effort requires the purchase of one (1) each Wet Dust Collector with Peripherals to include delivery, installation, performance verification, and training in Building 3705, Post D-30 at Tinker Ai... This effort requires the purchase of one (1) each Wet Dust Collector with Peripherals to include delivery, installation, performance verification, and training in Building 3705, Post D-30 at Tinker Air Force Base OK. The Wet Dust Collector will meet the following requirements: The item shall have a minimum of 10 horsepower. The item shall meet the electrical requirements of 460V 3PH 60HZ 18A. Item shall have Direct Drive with Airfoil Design and Non-Overloading. Item shall have a minimum air volume of 4400 CFM. Item shall have a Magnetic Motor Starter with Overload protection and a push button start/stop. Item shall have a PLC Controlled Water Level with High and Low Water Indicator Lights. Item shall have a Magnehelic Gauge. Item shall include and utilize MERV 11 Legacy Pre-Filters with a 60% Efficiency Rating. Item shall include and utilize HEPA Afterfilters with a 99.97% Efficiency Rating. Item shall include a High Temperature Shutdown Switch. Item shall be constructed of Heavy Welded Galvanized Steel, or Stainless Steel, with a Dura-Plate 239 Coating Throughout. Parts that do not touch water can be powser coated mild steel. Item shall include Fork Lift Pockets. Item shall be a maximum of ten (10) ft. tall and a maximum of (5) ft. wide. Item shall include a safety powered vent fan that runs all times that the primary blower is off which includes controls. Item shall have an aluminum blower wheel (or a backward inclined, spark-resistant blower wheel) and cone for added spark resistance with corrosion control for humid environments. Item shall meet the minimum requirements for NFPA484. Contractor shall provide installation, training, and performance verification IAW the SOW. Contractor shall warranty the Wet Dust Collector for a period of no less than one (1) year. All questions regarding the updated Item Description, Statement of Work, or the recent site visits are due to the Government no later than 2:00 PM CST on 14 February 2020.