Remanufacture of the B1B Horizontal Stabilizer Servo-cylinder
The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Remanufacture of the B1B Horizontal Stabilizer Servo-cylinder. The contractor shall provi... The United States Air Force through Air Force Sustainment Center (AFSC), Tinker AFB 73145 is contemplating the Remanufacture of the B1B Horizontal Stabilizer Servo-cylinder. The contractor shall provide all labor, facilities, equipment and all material to accomplish remanufacture. The work encompasses the disassembly cleaning, inspection, maintenance re-assembly, testing, and finishing actions required to return the item to a like-new condition in accordance with the solicitation requirements and all attachments. A 5-Year Firm Fixed Price Requirements type contract is contemplated with no Options. The requirements set forth in this notice are defined per Purchase Request FD20302501335 as follows: Written response is required. LI0001 - Input: NSN 1650-01-543-4395; P/N: L5873400-071; Best Estimated Quantity (BEQ): 2 LI0002 - Input: NSN 1650-01-253-7848/Output: NSN 1650-01-543-4395; P/N: Input: L5873400-061/ Output: L5873400-071; Best Estimated Quantity(BEQ): 5 LI0003 - Input: NSN 1650-01-253-7848; P/N: L5873400-061; Best Estimated Quantity (BEQ): 1 LI0004 - Input: NSN 1650-01-543-3024; P/N: L5873400-072; Best Estimated Quantity (BEQ): 4 LI0005 - Input: NSN 1650-01-249-1788/Output: NSN 1650-01-543-3024; P/N: Input: L5873400-062/ Output: L5873400-072; Best Estimated Quantity (BEQ): 6 LI0006 - Input: NSN 1650-01-249-1788; P/N: L5873400-062; Best Estimated Quantity (BEQ): 1 LI0007 - Over and Above LI0008 - Data - Not Separately Priced (NSP) Function: The B-1 Horizontal Stabilizer Servo-cylinder is used to convert hydraulic power to linear motion for precise movement and placement that activates the flight control surface. Dimensions: 1650012537848 14.5000” h x 7.6000” w x 45.3000” l and weighs 170.0000lb. Material: aluminum, steel and rubber. 1650015434395 26.1000” h x 15.1000” w x 53.1000” l and weighs 245.0000lb. Material: Steel Alloy 1650015433024 14.5000” h x 7.6000” w x 45.3000” l and weighs 170.0000lb. Material: Steel 1650012491788 14.5000” h x 7.6000” w x 38.3800” l and weighs 170.0000lb. Material: aluminum, steel, rubber Delivery: LI0001 2 EA every 30 days ARO LI0002 2 EA every 30 days ARO LI0003 2 EA every 30 days ARO LI0004 3 EA every 30 days LI0005 3 EA every 30 days LI0006 3 EA every 30 days Early delivery is acceptable Ship To: DLA DISTRIBUTION DEPOT OKLAHOMA 3301 F AVE CEN REC BLDG 506 DR 22 TINKER AFB OK 73145-8000 USA Duration of Contract Period: 5 Year Requirements Contract (No Options) Qualification Requirements: QUALIFICATION REQUIREMENTS APPLY. Interested vendors that have not been previously qualified for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office at 405-739-7243. As prescribed in FAR 9.202(e), the contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from approve sources. In order to receive any technical data related to this acquisition during the pre-solicitation phase, offerors must send an email request to the Public Sales Office AFLCMC.LZP.PUBSALES@us.af.mil. Release of any data is subject to applicable data rights. The request shall be on company letterhead and include the applicable solicitation number, the specific data needed (including TO and/or drawing numbers), and a copy of the current, approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html. The Government is not responsible for incomplete, misdirected, or untimely requests.** Some units of items listed in Section B may, upon disassembly and/or inspection, be determined to be beyond repairable limits specified in the Work Specification and/or Technical Orders. Any cost for work performed by the Contractor, prior to determination that such equipment is beyond repairable limits, shall be included in the unit price(s) of the listed item(s). Condemned units will not be counted as production. Export Control: N/A There are multiple approved sources. 100% Small Business Set Aside is contemplated for this requirement. The RMC is R1/C. The Government intends to issue a solicitation on or about 16 June 2025 with a closing response date of 13 August 2025 and estimated award date on or about 1 October 2025. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such. Based upon market research, the Government will not be using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All questions regarding this notice are to be submitted in writing via E-mail. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether they are a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. APPLICABLE TECHNICAL ORDERS Specific Technical Orders Part Number Noun Remanufacture Test Configuration L5873400-XXX Horiz. Stabilizer Servocylinder TO 9H2-4-277-3 1 June 2013 ATP L5873400 (43999) Rev H TO 9H2-4-277-4 1 June 2013 L5873440-001, -002 Valve Assembly TO 9H8-30-182-3 1 Mar 2012 TO 9H8-30-182-3 1 Mar 2012 TO 9H8-30-182-3 1 Mar 2012 L5873460-011, -012 Valve Assembly TO 9H8-30-183-3 15 Sep 1996 TO 9H8-30-183-3 15 Sep 1996 TO 9H8-30-183-3 15 Sep 1996 58860 Relief Valve TO 9P5-2-85-3 1 March 2017 TO 9P5-2-85-3 1 March 2017 TO 9P5-2-85-3 1 March 2017 General Technical Orders TO NUMBER DATE* TITLE 00-5-1 19 NOV 2024 AF TECHNICAL ORDER SYSTEM 00-5-3 20 JAN 2025 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-25-260 10 MAY 2022 METHODS AND PROCEDURES MANUAL -- UNIQUE IDENTIFICATION ASSET MARKING AND TRACKING 00-35D-54 15 FEB 2024 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY NOTE: These publications are for information purposes only. Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 21 OCT 2020 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-215 26 OCT 2020 REPORTING OF SUPPLY DISCREPANCIES DoD/Air Force Forms FORM NUMBER TITLE AFMC FORM 158 PACKAGING, HANDLING, STORAGE, AND TRANSPORTATION ACQUISITION AND SUSTAINMENT PRODUCT SUPPORT INSTRUCTION DD250 MATERIAL INSPECTION AND RECEIVING REPORT DD254 DOD CONTRACT SECURITY CLASSIFICATION SPECIFICATION DD1348-1A ISSUE RELEASE/RECEIPT DOCUMENT DD1423 CONTRACT DATA REQUIREMENTS LIST (CDRL) DD1574 DD1574-1 SERVICEABLE TAG – MATERIEL SERVICEABLE LABEL – MATERIEL DD1577-2 DD1577-3 UNSERVICEABLE (REPAIRABLE) TAG – MATERIEL UNSERVICEABLE (REPAIRABLE) LABEL – MATERIEL DD1577 DD1577-1 UNSERVICEABLE (CONDEMNED) TAG – MATERIEL UNSERVICEABLE (CONDEMNED) LABEL – MATERIEL DD1575 DD1575-1 SUSPENDED TAG – MATERIEL SUSPENDED LABEL – MATERIEL DD1694 REQUEST FOR VARIANCE (RFV) SF 328 CERTIFICATE PERTAINING TO FOREIGN INTERESTS SF 364 REPORT OF DISCREPANCY SF 368 PRODUCT QUALITY DEFICIENCY REPORT (PQDR) Other Government Publications PUBLICATION NUMBER TITLE MIL-STD-130 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NIST SP 800-53 Rev. 5 SECURITY AND PRIVACY CONTROLS FOR INFORMATION SYSTEMS AND ORGANIZATIONS NIST SP 800-61 Rev. 3 INCIDENT RESPONSE RECOMMENDATIONS AND CONSIDERATIONS FOR CYBERSECURITY RISK MANAGEMENT NIST SP 800-161 Rev. 1 CYBERSECURITY SUPPLY CHAIN RISK MANAGEMENT PRACTICES FOR SYSTEMS AND ORGANIZATIONS NIST SP 800-171 Rev. 3 PROTECTING CONTROLLED UNCLASSIFIED INFORMATION IN CONTRACTOR DOCUMENTS PART NUMBER DRAWING NUMBER TITLE AND DATE N/A N/A N/A OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition). The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Electronic procedures will be used for this solicitation. No telephone requests. Only written or emailed requests received directly from the requestor are acceptable.
Data sourced from SAM.gov.
View Official Posting »