Inactive

The 354th Contracting Squadron at Eielson AFB, Alaska is seeking sources for a mobile sanding/spray booth facility to service Air Ground Equipment (AGE). Requirement: The contractor shall employ a lab... The 354th Contracting Squadron at Eielson AFB, Alaska is seeking sources for a mobile sanding/spray booth facility to service Air Ground Equipment (AGE). Requirement: The contractor shall employ a labor force with the appropriate skills and/or certifications to ensure quality corrosion prevention and repair program for the 354 MXS/MXMFS, operating at Eielson AFB, AK. Contractor will supply all required equipment to meet the needs of the contract to include a permanent or temporary facility to accomplish contracted work. The facility must meet all base requirements for type of work being performed. This includes media or water blasting equipment to remove paint coatings to bare metal as required by tech data or upon request of owning work center. Rust and corrosion will be removed without hindering structural integrity of equipment. Owning work center and equipment specialists will be contacted to ensure corrosion removal limits will not degrade or render the equipment unsafe or unserviceable before major metal work on the equipment is accomplished. Contractor will restore corroded equipment back to manufactures specifications through metal repair and rework or fiberglass and plastic structures to the full extent possible without removing anything from the SE or Munitions trailers. All components will be removed by owning work centers. Restore equipment's coatings in accordance with equipment applicable technical directives. Equipment requiring full coating removal will be identified before work is to begin. Equipment requiring removal of entire protective coating to bare metal will be painted with zinc rich primer MIL-PRF-26915 and MIL-P-53030 and top coated as outlined in technical data for steel substrates only. Scuff sand and over coat process may be conducted based on severity of corrosion and paint condition provided bare metal spots are primed with MIL-PRF 23377 primer and a tie-coat coating is used on the entire piece of equipment followed by the topcoat as outline in required technical orders. All coatings will be applied with HVLP spray equipment unless authorized other means by owning work center. Tech Order requirements for coating thickness will be required for field level repair and repaint. Company will procure all paints/materials/PPE/consumables. They will also handle the hazardous waste and transport to proper locations for removal. Contractor will supply their own heaters and insulated facilities to handle the harsh winters at Eielson from October - March time frame. Provide a labor force with appropriate skills and/or certifications to ensure quality of maintenance is up to par with the above listed requirements. Work to be performed will be on site via contractor provided mobile facilities/structures. 1. All interested vendors must submit a capability statement demonstrating your ability to perform the PWS requirements 2. Include any past performance information (if applicable) **Note that Alaska Clause - 252.222-7000 Restriction on Employment of Personnel, would apply to any resultant solicitation and contract. This notice is currently for market research purposes only. No proposals are being requested at this time. No contract will be awarded as a result of this notice.