Inactive Total Small Business Set-Aside (FAR 19.5)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announce... This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Request for Quotation (RFQ) number FA489719QA219 shall be used to reference any written quote provided under this RFQ. The RFQ document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-05; Effective13 August 2019. This procurement is being solicited as a100% small business set-aside. The North American Industry Classification System (NAICS) code for this project is 334118 with a size standard of 1,000 Employees. The purpose of this combined synopsis and solicitation is for the purchase and delivery of a 3D Handheld Scanner in accordance with the attached Specification Sheet. When submitting your quotation, structure your Contract Line Item Numbers (CLINs) to the following format: Item Description Qty Unit Unit Price Total Amount CLIN 0001 3D Handheld Scanner 1 EA Ship to address: 366 Maintenance Squadron 230 Phantom Ave Bldg 920 Mountain Home AFB, ID 83648 *FAR Provision 52.212-1, Instructions to Offerors - Commercial Items (Oct 2018) applies to this acquisition and the following addendum applies: Offerors' quotation shall conform to the required CLIN structure as referenced above. Any offeror not conforming to the required attached Salient Characteristics and to this solicitation shall be deemed non-responsive and therefore ineligible for award. A firm fixed price contract is anticipated. Paragraph (a) The NAICS code and small business size standard for this acquisition appear above. Paragraph (b) Submit signed and dated offers to the point of contact listed below at or before the exact time specified in this solicitation. Paragraph (c) The vendor agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of quotes. RFQ due date: 5 September 2019 RFQ due time: 10:00 A.M. MST THIS MUST BE SENT TO jeffrey.corey.1@us.af.mil AS STATED BELOW, ANYTHING OTHERWISE CAN AND WILL BE CONSIDERED NONRESPONSIVE. YOU MAY WISH TO PLACE A READ/DELIVERY RECEIPT. Note: .zip files are not an acceptable format for the Air Force Network and will not go through our email system. All questions regarding this RFQ must be email to jeffrey.corey.1@us.af.mil by 10:00 A.M. MST on 3 September 2019. Please provide the following information with your quote: Company Name: ____________ DUNS Number: ____________ Cage Code: _______________ Estimated Delivery Time: ____________ Payment Terms: _________________________ Warranty: ________________ FOB (Select): ____ Destination _____ Origin Note: shipping costs (if any) must be included within your quote. All companies must be registered in the System for Award Management at https://www.sam.gov/portal/public/SAM/ to be considered for award. The Government will not provide contract financing for this acquisition. Invoice instruction shall be provided at time of award. FAR Provision *52.212-2, Evaluation -- Commercial Items (Oct 14), applies to this acquisition and the following evaluation is applicable: 1. Basis for Award (a) The Government will award a contract resulting from this RFQ to the responsible vendor whose quote conforming to the RFQ will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes: Evaluation Factors and steps: Price Factor, meeting requirements of the attached Salient Characteristics (Conformance) and Past Performance: Step 1: Evaluate all quotations for responsiveness. Step 2: Rank all responsive quotations based upon offeror's Total Evaluated Price (TEP) in ascending order from lowest price to highest price. Step 3: Evaluate lowest price offeror's conformance to the attached specifications by verifying the quoted product will satisfy Salient characteristics. If conformance is met, move to step four. If not, evaluate the next lowest priced vendor for conformance. Continue evaluating until conformance is achieved. Step 4: Evaluate lowest priced, fully conformed vendor's past performance. If past performance is acceptable move to step five, if not acceptable, evaluation process goes back to Step 3. See FAR 13.106-2(b)(3) for more information on evaluating past performance. Step 5: Make a Best-Value decision based on meeting requirements of the attached Salient Characteristics (Conformance), performance evaluation and a determination the price is fair and reasonable. (a) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful vendor within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the quote's specified expiration time, the Government may accept a quote (or part of a quote), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) 52.225-18 - Place of Manufacture (Mar 2015) (a) Definitions. As used in this clause- "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. (End of provision) Discussions: The government intends to award a purchase order without discussions with respective vendors/quoters. The government however, reserves the right to conduct discussions if deemed in its best interest. Include descriptive literature such as illustrations and drawings. FAR Provision *52.212-3, Offeror Representations and Certifications -- Commercial Items (Oct 18), with its Alternate I (Oct 14), applies to this acquisition. All vendors must be registered in System for Award Management at https://www.sam.gov/portal/public/SAM/ at the time of Quote submittal. FAR clause at *52.212-4, Contract Terms and Conditions -- Commercial Items (Oct 18), applies to this acquisition with the following Addendum: Paragraph (c) of this clause is tailored as follows: Changes in the terms and conditions of this contract may be made only by written agreement of the parties with the exception of administrative changes, such as changes in the paying office, appropriations data, etc., which may be changed unilaterally by the Government. Note: The vendor acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Federal Acquisition Regulation (FAR) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the FAR and Federal law govern and conflicting vendor terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract. FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (Aug 19), additionally, the following FAR clauses cited in 52.212-5 are applicable: (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91). 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 89(a)(1)(A) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). 52.233-3 Protest After Award (Aug 1996) (31U.S.C.3553). 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19U.S.C.3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31U.S.C.6101 note). 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011) (15U.S.C.644). 52.219-28 Post Award Small Business Program Rerepresentation (Jul 2013) (15U.S.C.632(a)(2)). 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2018) (E.O.13126). 52.222-50 Combating Trafficking in Persons (Jan 2019) 52.223-13 Acquisition of EPEAT?-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514). 52.223-15 Energy Efficiency in Energy-Consuming Products (Dec 2007) (42U.S.C.8259b). 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513). 52.223-20 Aerosols (Jun 2016) (E.O. 13693). 52.225-13 Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33 Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31U.S.C.3332). 52.232-36 Payment by Third Party (May 2014) (31U.S.C.3332). (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: N/A (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41U.S.C.3509). (ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91). (iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15U.S.C.637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (v) 52.222-17, Nondisplacement of Qualified Workers (May2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). (vii) 52.222-26, Equal Opportunity (Sept 2015) (E.O.11246). (viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38U.S.C.4212). (ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul2014) (29U.S.C.793). (x) 52.222-37, Employment Reports on Veterans (Feb2016) (38U.S.C.4212) (xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (xii) 52.222-41, Service Contract Labor Standards (Aug2018) (41U.S.C.chapter 67). (xiii) (A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22U.S.C.chapter78 and E.O 13627). (B) Alternate I (Mar2015) of 52.222-50(22U.S.C.chapter78 and E.O 13627). (xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May2014) (41U.S.C.chapter67). (xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May2014) (41U.S.C.chapter67). (xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E.O. 12989). (xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015). (xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706). (xix) (A) 52.224-3, Privacy Training (Jan 2017) (5U.S.C.552a). (B) Alternate I (Jan 2017) of 52.224-3. (xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10U.S.C. 2302 Note). (xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42U.S.C.1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46U.S.C. Appx.1241(b) and 10U.S.C.2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of Clause) *The following additional contract requirement(s) or terms and conditions apply to this acquisition and are consistent with customary commercial practices IAW FAR 52.101(f)): 52.204-7 System for Award Management (Oct 2018) 52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-16 Commercial and Government Entity Code Reporting (Jul 2016) 52.204-18 Commercial and Government Entity Code Maintenance (Jul 2016) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2019) As prescribed in 4.2105(a), insert the following provision: Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (AUG 2019) (a) Definitions. As used in this provision-- Covered telecommunications equipment or services, Critical technology, and Substantial or essential component have the meanings provided in clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Contractors are not prohibited from providing- (1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Representation. The Offeror represents that-- It [ ] will, [ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. (d) Disclosures. If the Offeror has responded affirmatively to the representation in paragraph (c) of this provision, the Offeror shall provide the following information as part of the offer- (1) All covered telecommunications equipment and services offered (include brand; model number, such as original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable); (2) Explanation of the proposed use of covered telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b) of this provision; (3) For services, the entity providing the covered telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known); and (4) For equipment, the entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known). (End of Provision) 52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation. (Dec 2016) As prescribed in 23.804(b), insert the following provision: Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation (Dec 2016) (a) This representation shall be completed if the Offeror received $7.5 million or more in Federal contract awards in the prior Federal fiscal year. The representation is optional if the Offeror received less than $7.5 million in Federal contract awards in the prior Federal fiscal year. (b) Representation. [Offeror is to check applicable blocks in paragraphs (1) and (2).] (1) The Offeror (itself or through its immediate owner or highest-level owner) [_]does, [_]does not publicly disclose greenhouse gas emissions, i.e., make available on a publicly accessible website the results of a greenhouse gas inventory, performed in accordance with an accounting standard with publicly available and consistently applied criteria, such as the Greenhouse Gas Protocol Corporate Standard. (2) The Offeror (itself or through its immediate owner or highest-level owner) [_]does, [_]does not publicly disclose a quantitative greenhouse gas emissions reduction goal, i.e., make available on a publicly available website a target to reduce absolute emissions or emissions intensity by a specific quantity or percentage. (3) A publicly accessible website includes the Offeror's own website or a recognized, third-party greenhouse gas emissions reporting program. (c) If the Offeror checked does in paragraphs (b)(1) or (b)(2) of this provision, respectively, the Offeror shall provide the publicly accessible website(s) where greenhouse gas emissions and/or reduction goals are reported:____. (End of provision) (End of Clause) The following *DFARS Clauses are applicable to this solicitation: 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 252.203-7005 Representation Relating to Compensation of Former DoD Officials. As prescribed in 203.171-4(b), insert the following provision: 252.204-7003 Control of Government Personnel Work Product. 252.204-7006 Billing Instructions. 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. 252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System-Statistical Reporting in Past Performance Evaluations 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors. 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials. 252.223-7008 Prohibition of Hexavalent Chromium. 252.225-7001 Buy American and Balance of Payments Program. 252.225-7002 Qualifying Country Sources as Subcontractors. 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings. 252.225-7048 Export-Controlled Items. 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 252.232-7006 Wide Area WorkFlow Payment Instructions. 252.232-7010 Levies on Contract Payments. 252.239-7017 Notice of Supply Chain Risk. 252.239-7018 Supply Chain Risk. 252.243-7001 Pricing of Contract Modifications. 252.244-7000 Subcontracts for Commercial Items 252.246-7003 Notification of Potential Safety Issues. 252.246-7008 Sources of Electronic Parts. 252.247-7003 Pass-Through of Motor Carrier Fuel Surcharge Adjustment to the Cost Bearer. 252.247-7023 Transportation of Supplies by Sea (FEB 2019) The following *AFFARS clauses are applicable to this solicitation: 5352.201-9101 Ombudsman (Jun 2016) 5352.223-9001 Health and Safety on Government Installations (Nov 2012) 5352.242-9000 Contractor Access to Air Force Installations (Nov 2012) The full text of these (*) clauses and (*) provisions may be assessed electronically at the website: http://farsite.hill.af.mil. NOTE: ALL PROVISIONS WILL BE REMOVED AT TIME OF AWARD BUT SHALL REMAIN PART OF THE CONTRACT FILE. Attachments: Salient Characteristics Dated 21 August 2019

Inactive Total Small Business Set-Aside (FAR 19.5)

SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION BUT INFORMATION AND PLANNING PURPOSES ONLY! This notice does not constitute a commitment by the Government. All information submitted in r... SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION BUT INFORMATION AND PLANNING PURPOSES ONLY! This notice does not constitute a commitment by the Government. All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. The Request for Quotation (RFQ) number is FA489719QA219 and shall be used to reference any written responses to this source sought. Mountain Home Air Force Base anticipates a requirement that is being considered under 100% small business set-aside. The North American Industry Classification Systems (NAICS) Code proposed 334118. The size standard for NAICS is 1,000 Employees. The requirement is to provide: The 366th Financial Acquisition Squadron at Mountain Home AFB, Idaho, is seeking potential sources interested in providing a 3D Handheld Scanner detailed in the attached Specification Sheet (Draft). Salient Characteristics: - Mobile able to be taken by hand out to aircraft - No robotic arm allowed due to space restrictions during use - Has a max size of 3.25 x 5.00 x 12.00 inches in size (to fit in small areas of the aircraft) - Has a max resolution of .002 inches - Has a max accuracy of .001 inches - Has an acquisition speed of 480,000 points per second Specification Sheet draft is attached. Include in your capabilities package your DUNS, Cage Code, System for Award Management expiration date, and any related specifications/drawings. Market research is being conducted to determine interest, capability, and socio-economic category of potential sources for the requirement. The government requests interested parties submit a brief description of their company's business size (i.e. annual revenues and employee size), business status (i.e., 8(a), Historically Underutilized Business Zone, service-disabled veteran-owned small business, HUBZone small business, woman-owned small business, veteran-owned small business, or small business) anticipated teaming arrangements, and a description of similar services offered to the Government and to commercial customers. All interested firms shall submit a capabilities package that explicitly demonstrates company capabilities-indicating examples of commercial sales-and product specifications related to this effort. Also indicate if you are the manufacturer, or provide the name and size of the manufacturer of the product(s) you will be supplying. Respondents are further requested to indicate their status as a Foreign-owned/foreign-controlled firm and any contemplated us of foreign national employees on this effort. NOTE: RESPONSES TO THIS SOURCES SOUGHT SHALL STATE IF THEY ARE A SUPPLIER OR MANUFACTURER! All interested firms should submit a capabilities package that outlines the firm's capabilities in providing the required services. Contractor is required to provide all management and labor required for the operation and management of the required services. Include three past references with current contact information and contract number. If subcontracts are to be used, provide anticipated percentage of effort to be subcontracted and whether small or large businesses will be used. The capabilities package should be brief and concise, yet clearly demonstrate an ability to meet the stated requirements. Recent, relevant experience in all areas should be provided. Teaming and/or subcontracting arrangements should be clearly delineated and previous experience in teaming must be provided. The response must not exceed 5 pages. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. The Government will use this information in determining its small business set-aside decision. Please note: All contractors doing business with the Federal Government must be registered in the System for Award Management (SAM) database. The website for registration is www.sam.gov. Responses may be submitted electronically to the following e-mail address: jeffrey.corey.1@us.af.mil and tammie.morlock@us.af.mil and/or by mail to 366 Gunfighter Ave, Suite 1136 Mountain Home AFB, ID 83648. Telephone responses will not be accepted. RESPONSES ARE DUE NO LATER THAN: 13 AUGUST 2019, BY 11:59 A.M. MST. Future information about this acquisition, including issuance of a quotation and/or applicable amendments, will be issued through FedBizOpps. Interested parties are responsible for ensuring they have the most up-to-date information regarding this acquisition.