Inactive Total Small Business Set-Aside (FAR 19.5)

1. The 27 Special Operations Contracting Squadron (27 SOCONS) is seeking information concerning the availability of capable contractors to provide: 2. The Contractor shall furnish all labor, materials... 1. The 27 Special Operations Contracting Squadron (27 SOCONS) is seeking information concerning the availability of capable contractors to provide: 2. The Contractor shall furnish all labor, materials, transportation, tools, equipment, supplies, supervision, coordination, insurance and administration to provide protective coating and/or painting services to Cannon AFB, NM (CAFB) facilities and roads on an occupied/unoccupied basis. a. Protective Coatings refer to paints, texturing, stains, varnishes, sealers, epoxies and other surface applied products, whether used as primer, intermediate or finish coats on a variety of surfaces. b. Facilities refer to buildings, structures, roads, parking lots and related items that may require protective coatings. NAICS: 238320 - Painting and Wall Covering Contractors PSC: Z1QA S/B Size Standard in millions of dollars: $19 million Estimated Disclosure of Magnitude: Between $1,000,000 and $5,000,000 3. The scope of work may include the following: General Work requirements: a) Surface preparation and painting (full or partial areas) b) Taping, bedding, texturing of gypsum board/drywall c) Repairing cracks, joints, and holes in walls and ceilings d) Applying, removing, and re-applying acoustical material on walls and ceilings e) Installing/removing vinyl/fabric wall covering or repairing wall covering f) Wood stripping, staining, and/or varnishing g) Concrete chipping and non-shrink repair at spalls and cracks h) Water or sand blasting; sanding, grinding, scraping, stripping i) Removal of dirt, mildew, fungus, and other foreign matter j) Surface preparation on surfaces made of wood, metal, plastic, vinyl, concrete, brick, concrete block, stucco, asphalt and Exterior Insulation Finishing Systems (EIFS) k) Protective coating application to facilities, including walls, ceilings, floors, doors and frames, window frames, fascia, soffits, trim, fences, gates, attachments (e.g., piping, exterior ductwork, rain gutters, etc.), pavement, roads, parking lots and curbing. l) Application and removal of adhesive labels and reflective bands m) Application of non-skid products (such as aluminum oxide) to concrete floors n) Application of retro-reflective beads to pavement striping Miscellaneous structures/equipment a) Fire hydrants and post indicator valves b) Electrical switch gear and transformers c) Signposts and structural stands d) Stairs, handrails e) Fences, gates, and bollards f) Fuel and water tanks up to and including 4,000-gallon capacity (exterior only) a. NOTE: bulk fuel storage area and elevated water storage tanks are NOT included g) Fuel steel piping up to and including 1 inch in diameter h) Water piping and electrical conduits Pavement Markings: a)The Contractor shall adhere to Federal standards for public roadways (or as directed by the CO or COR): U.S. Department of Transportation (DOT), Federal Highway Administration: Manual on Uniform Traffic Control Devices (MUTCD); Unified Facilities Guide Specifications (UFGS) 32 17 23: Pavement Markings. Pavement marking work may include painting or removing traffic lane striping, stop bars, bike lanes, words, crosswalks, directional arrows, handicap symbols, “no parking” areas and fire lanes. 4. This Sources Sought (SS) is issued for informational and planning purposes only. This is not a Request for Proposal (RFP). It is not to be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. Responses will not be considered as proposals, nor will any award be made as a result of a Sources Sought. The Air Force will NOT be responsible for any costs incurred by interested parties in responding to this Sources Sought. Contact with Government personnel other than those specificed in this Sources Sought by potential offerors or their employees regarding this project is prohibited. 5. If your fiarm is capable of providing the potential requirements described above, please provide a Capability Statement to the 27 SOCONS Contracting office by the deadline indicated in this Sources Sought. At a minimum, your Capability Statement should include: a) Company Name, Cage Code and UEID b) Bonding capability c) Any small business status d) Contact POC, phone number and email (The Capability Statement should include general information and technical background describing your firms experience for extremely simliar efforts as described in this Sources Sought)