Inactive Total Small Business Set-Aside (FAR 19.5)

The contractor shall perform the following removal, installation, and modification to the F450 Super Duty bus. 1) Remove existing seats and all encompassing related hardware. 2) Remove existing seat r... The contractor shall perform the following removal, installation, and modification to the F450 Super Duty bus. 1) Remove existing seats and all encompassing related hardware. 2) Remove existing seat railing system and all encompassing related hardware. 3) Remove existing floor covering and all encompassing related hardware. 1) By re-utilizing the existing seats, install as many of the seats as possible along the sides and rear of the interior passenger area. 2) Install new non-slick flooring that is neutral and matte in color. 3) View Attachment 1 for photos of desired outcome and current seating arrangement. 1) The seating shall be arrange so that the passengers will face the center of the passenger area. 2) There shall be no seats along the forward wall in the passenger area (the wall behind the driver’s seat). 3) The new flooring shall be non-slick, preferably a rubber material, and create a flush finish against the walls. 4) The new flowing shall create an even walking ground without any raised areas, bumps, or dips. The contractor shall perform a pre-inspection in accordance with the manufacturer’soperational checklist (Air Force Form 1800). A copy of the checklist will be provided to the QAP at the time of the pre-final inspection.