Inactive Total Small Business Set-Aside (FAR 19.5)

Statement of Need HDD/SSD Shredder At-Site Preventive Maintenance . Grease all fittings, Clear cutting head of debris, adjust tension of deflectors, lubricate cutting head, verify safety limit switche... Statement of Need HDD/SSD Shredder At-Site Preventive Maintenance . Grease all fittings, Clear cutting head of debris, adjust tension of deflectors, lubricate cutting head, verify safety limit switches are working properly, verify gear oil in bath pan and reduction box are at proper levels. . Clear rails of any debris and adjust as necessary, Check tension on conveyor belt and belt condition, Check chain that drives belt and lubricate. . Check blast gate for proper air flow, Check HEPA and pre-filters and note condition, evaluate fan to ensure proper rotation. Disintegrator At-Site Preventive Maintenance 20 Point PM Sentry Plus Service Program . Remove old knives, sharpen spare knives, install sharpened knives, calibrate installed knives to application for optimal performance, Grease rotor bearings, inspect hopper for easy opening and closing to cutting chamber, inspect rotor for excessive wear, inspect screen for proper fit and wear, inspect drive belt for wear, adjust drive belt tension to factory specifications for maximum efficiency, Check sheave bolt tension and set to factory specifications. . Inspect fan for proper operation, inspect evacuation system for leaks, Lubricate and grease air system as required, adjust flow controls as needed, inspect filter, shake filter, and empty debris if required. . Inspect all safety switches ensuring they function properly, inspect all starters ensuring proper operation. . Complete evaluation report with recommendations. Run system check on overall machine performance, Complete evaluation report with recommendations. Paper Shredder At-Site . Preventive Maintenance, Inspection of shredder and cabinet for visual damage or oil leaks, inspect shred samples to ensure shredded waste meets specifications, check all functions of system, Clean and lubricate system, clean photo-eye sensors and cutting head, Clean loose material from cabinet and/or top cover