Inactive Total Small Business Set-Aside (FAR 19.5)

The 22d Contracting Squadron (CONS) of the 22d Air Refueling Wing, McConnell AFB, Kansas, announces the solicitation for Airfield Rubber Removal and Pavement Markings, solicitation number FA462120R000... The 22d Contracting Squadron (CONS) of the 22d Air Refueling Wing, McConnell AFB, Kansas, announces the solicitation for Airfield Rubber Removal and Pavement Markings, solicitation number FA462120R0005. The effort shall include, but not be limited to, removing existing pavement taxilane centerline, vehicle lane, hatch area, vehicle lane arrow, and sign markings in multiple locations; and removing pavement apron edge line and shoulder deceptive shoulder markings. All pavement marking removal shall be on PCC pavement other than a very small amount of asphalt deceptive shoulder marking removal. Paint apron edge lines and deceptive shoulder markings. Layout new apron aircraft parking layout, and paint new taxilane centerline, vehicle lane, aircraft stop blocks, aircraft parking stall number signs and security sign markings. Use diamond grinding to remove 1/16 to 1/8 inch-thick PCC pavement coatings. The Contractor shall meet all applicable local, state, federal, and other jurisdictional codes in the performance of this contract. The magnitude of construction is expected to be between $100,000 and $250,000. The NAICS code for the requirement is 237310, Highway, Street, and Bridge Construction; the Small Business Size Standard is $39.5M. Hard copies of the solicitation will not be provided; the entire solicitation, including the specifications and drawings, will be made available only on https://beta.sam.gov/. Potential offerors are responsible for monitoring this site for amendments to this synopsis and any other pertinent information and for downloading their own copy of the solicitation package and drawings. The solicitation date is approximately 3 June 2020. The solicitation will be a Request for Quote (RFQ) for a firm-fixed price contract. The solicitation will state the basis for award and exact terms for the award decision. The Government intends to execute a 100% Small Business set-aside based on market research indicating the expectation of two or more offers from small business concerns. Potential offerors MUST register at https://www.sam.gov/SAM/ in order to receive notification and /or changes to the solicitation. All contractors MUST be registered in the System for Award Management (SAM) database or their proposal will not be considered. The Davis Bacon Act (40 U.S.C. 3141 et seq.) applies to this solicitation. Check the https://beta.sam.gov/ for current wage determination information from the Department of Labor. NOTICE TO OFFERORS: FUNDS ARE NOT PRESENTLY AVAILABLE FOR THIS EFFORT. NO AWARD WILL BE MADE UNDER THIS SOLICITATION UNTIL FUNDS ARE AVAILABLE. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION, EITHER BEFORE OR AFTER THE CLOSING DATE FOR THE RECEIPT OF PROPOSALS. IN THE EVENT THE GOVERNMENT CANCELS THIS SOLICITATION, THE GOVERNMENT HAS NO OBLIGATION TO REIMBURSE AN OFFEROR FOR ANY COSTS. Per AFFARS 5352.201-9101: (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Ms. Susan Madison, AFICC/KM (OL AMC), 510 POW/MIA Drive, Scott AFB IL 62225-5022, (618) 229-0267, (DSN 779-0267), fax (618) 256-6668 (DSN 576-6668), email: Susan.Madison@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

Inactive Total Small Business Set-Aside (FAR 19.5)

The 22d Contracting Squadron (CONS) of the 22d Air Refueling Wing, McConnell AFB, Kansas, announces the solicitation for Airfield Rubber Removal and Pavement Markings, solicitation number FA462120R000... The 22d Contracting Squadron (CONS) of the 22d Air Refueling Wing, McConnell AFB, Kansas, announces the solicitation for Airfield Rubber Removal and Pavement Markings, solicitation number FA462120R0005. The effort shall include, but not be limited to, removing existing pavement taxilane centerline, vehicle lane, hatch area, vehicle lane arrow, and sign markings in multiple locations; and removing pavement apron edge line and shoulder deceptive shoulder markings. All pavement marking removal shall be on PCC pavement other than a very small amount of asphalt deceptive shoulder marking removal. Paint apron edge lines and deceptive shoulder markings. Layout new apron aircraft parking layout, and paint new taxilane centerline, vehicle lane, aircraft stop blocks, aircraft parking stall number signs and security sign markings. Use diamond grinding to remove 1/16 to 1/8 inch-thick PCC pavement coatings. The Contractor shall meet all applicable local, state, federal, and other jurisdictional codes in the performance of this contract. The magnitude of construction is expected to be between $100,000 and $250,000. The NAICS code for the requirement is 237310, Highway, Street, and Bridge Construction; the Small Business Size Standard is $39.5M. Hard copies of the solicitation will not be provided; the entire solicitation, including the specifications and drawings, will be made available only on https://beta.sam.gov/. Potential offerors are responsible for monitoring this site for amendments to this synopsis and any other pertinent information and for downloading their own copy of the solicitation package and drawings. The solicitation date is approximately 3 June 2020. The solicitation will be a Request for Quote (RFQ) for a firm-fixed price contract. The solicitation will state the basis for award and exact terms for the award decision. The Government intends to execute a 100% Small Business set-aside based on market research indicating the expectation of two or more offers from small business concerns. Potential offerors MUST register at https://www.sam.gov/SAM/ in order to receive notification and /or changes to the solicitation. All contractors MUST be registered in the System for Award Management (SAM) database or their proposal will not be considered. The Davis Bacon Act (40 U.S.C. 3141 et seq.) applies to this solicitation. Check the https://beta.sam.gov/ for current wage determination information from the Department of Labor. NOTICE TO OFFERORS: FUNDS ARE NOT PRESENTLY AVAILABLE FOR THIS EFFORT. NO AWARD WILL BE MADE UNDER THIS SOLICITATION UNTIL FUNDS ARE AVAILABLE. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THIS SOLICITATION, EITHER BEFORE OR AFTER THE CLOSING DATE FOR THE RECEIPT OF PROPOSALS. IN THE EVENT THE GOVERNMENT CANCELS THIS SOLICITATION, THE GOVERNMENT HAS NO OBLIGATION TO REIMBURSE AN OFFEROR FOR ANY COSTS. Per AFFARS 5352.201-9101: (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Ms. Susan Madison, AFICC/KM (OL AMC), 510 POW/MIA Drive, Scott AFB IL 62225-5022, (618) 229-0267, (DSN 779-0267), fax (618) 256-6668 (DSN 576-6668), email: Susan.Madison@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

Inactive

Sources Sought Synopsis Airfield Paving Markings McConnell AFB THIS IS A SOURCES SOUGHT NOTICE ONLY; THIS IS NOT A REQUEST FOR PROPOSAL. THERE IS NO SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE... Sources Sought Synopsis Airfield Paving Markings McConnell AFB THIS IS A SOURCES SOUGHT NOTICE ONLY; THIS IS NOT A REQUEST FOR PROPOSAL. THERE IS NO SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE AT THIS TIME. The 22d Contracting Squadron (22 CONS), McConnell AFB, KS, is seeking capabilities from businesses classified as Small, 8(a), Woman Owned Small Business (WOSB), Veteran Owned Small Business (VOSB), Service Disabled Veteran Owned Small Business (SDVOSB), or Historically Underutilized Business Zone (HUBZone) for the purposes of determining the appropriate level of competition for an Airfield Paving Markings contract. Depending on the response to this notice and other market research, 22 CONS may limit the competition to a specific category of small business at the exclusion of all other potential business concerns. If adequate responses are not received from the previously mentioned concerns, the acquisition may be solicited on an unrestricted basis. 22 CONS intends to issue a formal Request for Proposal (RFP) during the April/May 2020 timeframe for the acquisition of an Airfield Paving Markings effort to be performed at McConnell AFB. The effort shall include, but not be limited to, removing existing pavement taxilane centerline, vehicle lane, hatch area, vehicle lane arrow, and sign markings in multiple locations; and removing pavement apron edge line and shoulder deceptive shoulder markings. All pavement marking removal shall be on PCC pavement other than a very small amount of asphalt deceptive shoulder marking removal. Paint apron edge lines and deceptive shoulder markings. Layout new apron aircraft parking layout, and paint new taxilane centerline, vehicle lane, aircraft stop blocks, aircraft parking stall number signs and security sign markings. Use diamond grinding to remove 1/16 to 1/8 inch-thick PCC pavement coatings. The magnitude of construction is expected to be between $100,000 and $250,000. The NAICS code for the requirement is 237310, Highway, Street, and Bridge Construction; the Small Business Size Standard is $39.5M. The successful contractor will be required to furnish all labor, tools, materials, expertise, testing, surveying, equipment, reports, samples, warranties, and transportation necessary to complete the work IAW the Statement of Work, which will be included with the solicitation package. We are requesting that all interested and qualified firms respond to this sources sought notice with a capability statement similar to your marketing package used in the everyday course of doing business. Oral communications are not acceptable in response to this notice. Contractors are highly encouraged to submit a package containing the following information: (1) Company information (e.g. name, business address, point of contact, telephone number, e-mail address). Also include DUNS Number or CAGE Code; (2) Socio-economic Status (e.g., Small, 8(a), WOSB, VOSB, SDVOSB, HUBZone, and any associated documentation of such status, certification or approvals). Also include business size in relation to the NAICS code size standard assigned to this acquisition; (3) Summary of how your company is capable and qualified to handle this type of construction; (4) Summary of construction projects that show your company’s capabilities and past performance which demonstrate the ability to execute an airfield pavement markings effort. The list of relevant projects should include names of the firm(s) and project team members; customer or agency and their point(s) of contact (e.g., contracting officer, project manager, inspector, contracting officer’s representative) with titles, phone numbers and e-mail addresses; project scope: project value; type of contract; percentage of work completed as the prime contractor; and trades involved in the project; (5) Bonding capability per contract and aggregate. All of the above must be submitted in sufficient detail for a decision to be made on the availability of small business concerns. Please limit submission of your information capability statement and data to five (5) pages. Send responses to SSgt Allison Gochenour via e-mail at allison.gochenour@us.af.mil and SSgt Montgomery Manning at montgomery.manning@us.af.mil in PDF or Microsoft word format. In order to be considered in the market survey, please reply by 2:00 p.m. (CST), Monday, 6 April 2020. The information requested by this notice will be used within the DoD and SBA to facilitate decision making and will not be disclosed outside the agencies. This is a sources sought announcement only; no solicitation exists or is available at this time. Any information contained herein is subject to change; any updated information will be provided in future announcements and posted electronically on the beta.SAM.gov website at https://beta.sam.gov/. The Government shall not reimburse the costs of preparing responses to this sources sought notice. In addition, this announcement shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. In the event a solicitation is developed, it will be published on the beta.SAM.gov website. Potential interested parties are responsible for monitoring this site for the release of the solicitation package as well as downloading their own copy of the solicitation and amendments, if any.