Inactive
Notice ID:FA462019QA216
Fairchild AFB, WA is seeking information regarding Tucker Sno-Cat Blade push frame attachment. The part numbers for the push frame attachment are as follows: Item Number 00-244 Straight Blade Push Fra...
Fairchild AFB, WA is seeking information regarding Tucker Sno-Cat Blade push frame attachment. The part numbers for the push frame attachment are as follows: Item Number 00-244 Straight Blade Push Frame (1 each) 00-5885_1 110" Straight Blade only (1 each) 00-22 Blade Hydraulic Hose Kit (1 each) 00-243 Sweco 2.5X14 Angle Cylinder Rod S-2 (2 each) 20-4851_1 Sweco Lift Cylinder 2 ½" X 12" W/5" (1 each) 20_3483_2 Sweco 2 X 6 Tilt Cylinder (1 each) Contractors are to provide the above parts, or equal, that work in conjunction with the Tucker Sno-Cat 1600 currently in use. Delivery of the units shall be FOB Destination to Fairchild AFB, WA 99224. Contractors are requested to provide their suggested product meeting the following minimum requirements: - Must work with Tucker Sno-Cat Model 1600 - Parts only, no installation is required - Plow Blade push frame shall be able to skim down the surface of snow, while being able to be adjustable in depth. This must allow for the plow kit to be able to leave a compacted snow trail, without plowing all the way down to the ground. - All "Or Equal" products must meet all of the standards set forth in this sources sought. The requirement is expected to be fulfilled under the likely NAICS 333120, Construction Machinery Manufacturing, with a size standard of 1,250 employees. The PSC is 3830. This sources sought notice is for informational and planning purposes only. This is not a Request for Quotes. It does not constitute a solicitation and is not to be considered as a commitment by the government. All firms responding to this sources sought notice are advised that their response to this notice is not a request that will be considered for contract award. All interested parties shall be required to respond to the resultant solicitation separately from their response to this sources sought notice. A responsible potential source shall have registered with the System for Award Management (SAM). The intent of this sources sought is to verify if there are any dealer, distributors, vendors, etc., with the capabilities to provide the above-referenced items. All vendors that are capable of providing either the above parts, or equal, are welcome to respond with their capability to meet the requirement. All products offered must not void any manufacturer warranty. Interested contractors shall provide their business category (small or large). The response should include one page providing the following information: business name and address, CAGE code, size classification, socioeconomic classification based on NAICS size standard and a point of contact.
