Inactive Total Small Business Set-Aside (FAR 19.5)

This contract is for the Dover Airshow tent rental to include delivery, setup, teardown and removal. The contractor is to provide these services in a manner that will ensure the safety and general wel... This contract is for the Dover Airshow tent rental to include delivery, setup, teardown and removal. The contractor is to provide these services in a manner that will ensure the safety and general wellbeing of Airshow attendees. The contractor shall provide all personnel, equipment, tools, materials, supervision, licenses, quality control, and other items and services necessary to complete this contract. Please refer to the PWS for more information. Please use Attachment 3 - Pricing Sheet to submit your proposal. Email Proposals to carl.zahn.3@us.af.mil and justin.bordalo@us.af.mil NLT 10 April 2024 at 1:00 PM EDT

Inactive

The Secretary of Defense directed vehicles for our Dignified Transfers. These provide a professional image for our high profile mission. They must be outfitted with a functional roller systems to sati... The Secretary of Defense directed vehicles for our Dignified Transfers. These provide a professional image for our high profile mission. They must be outfitted with a functional roller systems to satisfactorily complete the DT in the best use and in the quietest way. Vehicles must be specifically modified for the unique mission of transporting transfer cases containing the remains of fallen. 1.1 Measurements are of the current vehicles (red on attachment) with current racking system (gold on attachment) the inside measurements of both vans (FORD transit van 350 HR): - Behind front seats to rear double doors – 159” - Floor to roof – 78” - Left side wall to Right side wall – 68” The measurements of the current racking system within both vans: - Rear doors to front of van – 96” - Roller rows at 30” each – 3 - One set of rollers mounted to the floor center of van - Two sets of rollers mounted 33” off the floor left and right of center row leaving a 3” of Spacing between them - These two sets of rollers would set 53” from top of roller to top of roof 1.2. G43-0172R - Install Custom 3 - Part Roller System. Fabricate 3-Tier Fabricated Base, Brackets and Roller System according to user specifications and pictures of other vehicles with similar systems. Plus, install low voltage LED lights with two switches. In addition, remove current roller system that is inadequate for mission. (See Photo’s provided) 1.3. G43-0178R - Install Custom 2 - Part Roller System. Provide labor and materials, fabricate 2- Tier Fabricated Base, Brackets and Roller System according to user specifications and pictures of other vehicles with similar systems. Plus, install low voltage LED lights with two switches. Must meet all safety egress requirements in relation to the double doors. (See Photo’s provided) 1.4. New racking system must be built with either heavy duty steel or iron materials 1.5. Each row must be able to accommodate 600 pounds or more 1.6. Current racks will need to be removed and not be re-use any of the parts or material 1.7. Both vehicles cannot be out of service at the same time or for an extended period of time 1.8. Photos provided for this projected must only be used for the sole purpose of the project and must not be open to viewing to members without a need to know as this is a sensitive matter.

Inactive Total Small Business Set-Aside (FAR 19.5)

The 436th Contracting Squadron (436 CONS) is seeking information concerning the availability of capable contractors shall provide all equipment and materials, to include delivery, for an orbital rivet... The 436th Contracting Squadron (436 CONS) is seeking information concerning the availability of capable contractors shall provide all equipment and materials, to include delivery, for an orbital riveter to repair C-5M main landing gear brake torque tubes. This sources sought notice is for informational purposes only. This is NOT a Request for Proposal, Request for Quote, or Invitation for Bid. It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary. The contractor shall provide the 436 MXS/MXMCH section with: T-501F orbital riveter, or similar product, with the following salient characteristics: 1. Power Source: 3 Phase 230 or 460 VAC/60Hz 2. T-205 orbital head with rivet head form tool 3. Horn fixture T70-447B 4. Operating environment: 32 degrees F to 114 degrees F 5. Dual hand safety controls w/ mounting brackets 6. Foot activating device w/ safety guard 7. Dimensions: 23.5”Lx26.5”Wx76.7”H (2ft birth all around for clearance) This Request for Information (RFI) is issued for informational and planning purposes only and will be used to facilitate decision making and will not be disclosed outside the agency. This is not a Request for Quote (RFQ). It is not to be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. Responses will not be considered as quotes, nor will any award be made as a result of this RFI. The Air Force will NOT be responsible for any costs incurred by interested parties in responding to this RFI. Contact with Government personnel other than those specified in this RFI by potential offerors or their employees regarding this project is prohibited. This FedBizOps notice is an announcement seeking market information on vendors capable of providing the product as described herein. For purposed of this RFI, the North American Industry Classification System (NAICS) Code is 333992 – Welding and Soldering Equipment Manufacturing, and the small business size standard is 1,250 Employees. If your firm is capable of providing the requirements described above, please contact SSgt Sean Willian sean.willian@us.af.mil or TSgt Christopher Castillo, christopher.castillo.5@us.af.mil by Monday March 29, 2021 @ 1:00 pm Eastern Daylight Time (EDT). At a minimum the following information is requested: (1) Company Cage Code, DUNS, name, address, point of contact, telephone number, and email address; (2) Any small business status (8(a), HUB-Zone, Veteran-owned, Women-owned, etc.); (3) Indicate which NAICS code your company usually uses to provide the requirements described above. Please provide rationale if your answer is different from NAICS 333992. Note: The interested vendors list of this notice will not be used for decision making purposes for any small business set asides. For your business to be considered as a potential vendor for set aside purposes you must submit a Capabilities Statement as requested by this notice. Failure to do so may result in your business category not being considered as part of a decision by the Government to set aside.