The U.S. Government requires an electric gate solution outside multiple buildings, with the contractor furnishing all equipment, labor, supervision, and materials. The project includes a 21 ft x 7 ft motorized metal chain-link gate north of Building 1286 and a 25 ft x 7 ft motorized metal chain-link gate north of Buildings 1281 and 1282, both allowing munitions drivers to open via keypad from their vehicles. The contractor must attend a site visit; coordinate with the 42nd Civil Engineering (CE) for temporary power, rentals, installation/removal, and underground locates; and provide delivery, pickup, maintenance, and refueling of rental items. Electrical installations must be completed by a certified electrician per NFPA 70, with required certifications, drawings, warranties, facility assessment, breaker labeling, and hot-work permits. Start-up and commissioning of the electric solution must be completed within one day of contract execution.

The U.S. Government requires an electric gate solution outside multiple buildings, with the contractor furnishing all equipment, labor, supervision, and materials. The project includes two motorized metal chain-link gates with round frames—a 21 ft x 7 ft gate north of Building 1286 and a 25 ft x 7 ft gate north of Buildings 1281 and 1282—both operable by keypad from a munitions driver’s vehicle. The contractor must attend a site visit, coordinate with the 42nd Civil Engineering (CE), provide rental delivery/pickup, maintenance/refueling, certifications, drawings, manufacturer warranties, and perform all work under applicable codes and NFPA 70 using a certified electrician. Power for the 25 ft gate will come from an electrical panel at Building 1281 or 1282, requiring concrete/asphalt cutting for below-grade duct, while the 21 ft gate will connect to Building 1286 with direct-buried conductor in dirt; underground locates via Alabama One Call and Base CE are required. Startup and commissioning must be completed within one day of contract execution, with proper breaker labeling, facility assessment, and hot-work permits handled as needed.

The USG seeks a contractor to furnish all equipment, labor, supervision, and materials for an electric gate solution at multiple buildings, including a 21'x7' chain-link gate north of Building 1286 and a 25'x7' chain-link gate north of Buildings 1281 & 1282, each motorized and keypad-accessible for in-vehicle munitions driver use. The contractor must attend a site visit, coordinate with the 42nd Civil Engineering (CE) for temporary power and rental item install/removal, and provide delivery, pickup, refueling, and maintenance of rented items. Electrical work must be completed by a certified electrician per NFPA 70, with proper breaker labeling, firestopping, facility assessment, and hot work permits as required. Power will come from existing panels at Buildings 1286 and 1281/1282, requiring concrete/asphalt cutting and underground duct work for one gate, and the vendor must call Alabama One Call and Base CE for underground locates. Startup and commissioning must be completed within one day of contract execution.