Inactive

47 FTW/MX is requesting the procurement of 3 each, Gasoline Powered Hydraulic Power Unit with below listed specifications: • Must have an independent power supply system to allow for operation with hy... 47 FTW/MX is requesting the procurement of 3 each, Gasoline Powered Hydraulic Power Unit with below listed specifications: • Must have an independent power supply system to allow for operation with hydraulics on Beechcraft T-1A Jayhawk, T-38 Talon, and T-6A Texan aircraft for remote operation or Maintenance facility without Electric Power • Must be able to operate with gasoline • Must be a weather proof heavy duty all welded steel tubing frame • Unit to be acquired must be light weight and portable to move from one location to another by personnel with use of a truck and/or trailer, so the power unit measurement/weight specification must be within; o Depth requirements; . Minimum 20in; maximum 25in o Width requirements; . Minimum 35in; maximum 40in o Height requirements: . Minimum 30in; maximum 35in o Weight requirements: . Minimum 270 lbs; maximum 280 lbs • Must contain a solid, puncture proof wheels with no flats guarantee • Must contain a 3/8in pressure hose with a minimum length of 15ft • Must contain 1/2in return hose with a minimum length of 15ft • Must contain an electric starter with oversized battery • Pump Pressure limits o Minimum 425 to 475 PSI o Maximum 3900 to 4100 PSI • Pump Flow 6 gallons per minute (GPM) o Minimum 6 GPM o Maximum 10 GPM • 14 HP Industrial Duty Engine horse power (HP) o Minimum 15 HP o Maximum 25 HP • Reservoir capacity o Minimum 12 US gallons o Maximum 15 US gallons • Must contain reservoir selector valves • Must contain panel mounted controls and monitoring system • Must contain a high pressure oil temperature gauge (1% accuracy) • Must contain a high efficiency, Non-Bypass Pressure Filtration system • Must contain a large capacity return Filter with water absorbing filter to remove moisture in hydraulic fluid, filter must be rated at; o Minimum 01 micron o Maximum 10 microns • Pressure Gauge and Flow Meter must have certificates of calibration • Must contain a panel mounted operational instructions • Must contain a 2 year Manufactures Warranty The Hydraulic Power Unit will be delivered to Laughlin AFB Texas building 508. Disclaimer: The issuance of this sources sought is being done strictly for the purpose of market research. This sources sought will be the basis for collecting information on capabilities available and is being issued solely for information and planning purposes. All information contained in this sources sought is preliminary as well as subject to modification and is in no way binding on the Government. Issuance of this sources sought will not result in contract award and is not to be construed as any form of commitment on behalf of the Government. Funds are not currently available for this requirement. The Government will not reimburse companies for any costs associated with the submissions of their responses.