Inactive

The Air Force Research Laboratory, Munitions Directorate (AFRL/RW) owns and operates a 3D metal printer – model ProX DMP 300 manufactured by 3D Systems Inc. The 3D printer is regularly used and must b... The Air Force Research Laboratory, Munitions Directorate (AFRL/RW) owns and operates a 3D metal printer – model ProX DMP 300 manufactured by 3D Systems Inc. The 3D printer is regularly used and must be maintained in full operating condition and to the manufacturer’s specifications at all times to ensure accurate function. This maintenance includes preventative services such as filter changes, machinery lubrication, software and firmware updates, and seal replacement. Maintenance also includes diagnostic services such as alignment of optical/laser and kinematic/mechanical systems; calibration; troubleshooting of mechanical, electrical, hydraulic, and pneumatic systems; and hardware repair and/or replacement. The specialized nature of the work requires highly trained service technicians to perform. Therefore, AFRL/RW requires a service plan covering preventive and diagnostic maintenance on the ProX DMP 300 printer. Based on market research and available funding, the plan should cover all preventative maintenance and provide a discount on diagnostic services. Please contact 2d Lt Kevin Caster at kevin.caster.1@us.af.mil if you can provide this service.

Inactive Total Small Business Set-Aside (FAR 19.5)

See attached documentation for solicitation details. An amendment has been added to the solicitation to add site visit coordination, 1 Feb 2022 (1000-1300hrs). The SVL and Base Access documents will c... See attached documentation for solicitation details. An amendment has been added to the solicitation to add site visit coordination, 1 Feb 2022 (1000-1300hrs). The SVL and Base Access documents will contain the necessary information for vendors that are interested in this service. Please follow the contact information found in the solicitation if there are any questions. A second amendment has been added to this solicitation. The purpose of this amendment is to respond to questions from the site visit, make other changes to the solicitation and incorporate an updated PWS by: 1. Adding answers to the questions asked during the site visit, 2. Adding the current PWS dated 3 Feb 22, 3. Adjusting the solicitation closing date from 14 Feb 22 to 18 Feb 22, 4. Updating the Technical Capability Documentation page limit from 6 to 10 documents 5. Updating the method of quote submission in the solicitation by email only 6. Adding the 1 Feb 22 Site Visit sign in sheet. This purpose of this 3rd amendment is to incorporate an updated PWS and add an additional clause by: 1. Inform vendors that the solicitor is unable to take any more questions 2. Incorporating the PWS dated 14 Feb 22. 3. Adding an additional question and answer. 4. Extending the solicitation closing date from 18 Feb 22 to 22 Feb 22

Inactive Total Small Business Set-Aside (FAR 19.5)

See attached synopsys documentation for details.