Inactive

Renovate Security Upgrades, Room 401, Building 351 FTFA 18-1041 EGLIN AFB, FL Eglin Air Force Base (AFB), FL has a requirement to Renovate Security Upgrades Room 401, Bldg. 351 on Eglin AFB, FL. The N... Renovate Security Upgrades, Room 401, Building 351 FTFA 18-1041 EGLIN AFB, FL Eglin Air Force Base (AFB), FL has a requirement to Renovate Security Upgrades Room 401, Bldg. 351 on Eglin AFB, FL. The North American Industry Classification System (NAICS) code for this requirement is 236220, Commercial and Institutional Building Construction, with a size standard of $39.5M. Statement of Magnitude is between $250,000 - $500,000. This is a 100% Small Business Set-Aside competitive acquisition utilizing a best value source selection process and award will be made based upon the Best Value to the Government in accordance with FAR Part 15.3. Period of Performance is 300 days after notice to proceed. Project Description: This is a secure facility Architecture: This project consists of the selective demolition of existing construction and complete new interior renovations to provide new secure office configurations for Room 401 of Building 351. Demolition will include removal of all doors and frames, selective removal of interior metal stud/gwb and removal of suspended acoustical tile ceiling system, carpet flooring and resilient wall base. Temporary barriers and protocol will be required to prevent disruption of ongoing daily operations in adjacent areas. New work will provide a man-trap entry area, a secure open office area of approximately 722 square feet to accommodate 8 persons, and two secure offices to accommodate up to two persons each. New metal stud/gwb walls and doors will be secure per ICS 705, and STC 50-rated, extending to and sealing to true floor and ceiling decks to provide secure ICS 705-compliant perimeter. A new closet, accessible via cipher lock from the existing fourth floor corridor, will provide housing for Room 401 users' laptop computers. Up to ten laptops will be accommodated in the closet on adjustable open wire shelving. New interior architectural finishes will be suspended acoustical tile ceiling and grid, painted gypsum board walls and carpet tile flooring. New doors will be solid core wood, field-finished, with all required security hardware. The doors and frames from the corridor to the man-trap, the man-trap to the secure office, and the door to the Computer Closet will be 20 minute fire-rated. Existing windows will remain as is wherever new construction does not interfere with existing window locations. Windows will receive new room darkening roller shades. Structural Interior Design: The Structural Interior Design consists of new carpet, paint, wall base and ceiling tile in the offices and Mantrap. The closet shall have a vinyl composition floor tile. The existing fixtures in the corridor shall be removed, stored and re-installed by the general contractor. New finishes in the building corridor where required due to the renovation, shall match the existing with the exception of the carpet. The new carpet tile in the office and Mantrap areas shall be used in the corridor where needed. The existing FF&E shall be removed by the contractor, stored and re-installed with any additional parts and pieces added due to the new systems furniture layout and in accordance with the electrical and communications requirements. Electrical Scope: A new 120/208V, 3 phase panel will be installed in the renovated area to serve the new circuits. New lighting and power will be installed in the renovated areas. The lighting will be LED type. Emergency lighting and exit signs will contain battery backup. There will be a blue light system installed in the secure spaces. Receptacles will be installed in general areas and adjacent to all communications outlets. Furniture will be connected through whips. Communications Scope: There will be user communications networks wall cabinets located in the secure spaces. The NIPR outlets will be served from a new wall cabinet in the secure space. NIPR will be Cat 6 ScTP and all other networks will be fiber. All NIPR and SIPR work will be installed per 96CS requirements. There are 3 additional secure user fiber networks. Each network is color coded and will be terminated to their separate cabinets/patch panels. HDMI extenders/Cat 6 ScTP will be installed from the Laptop closet to each workstation. Security Scope: New access control (ACS) rough-in, intrusion detection (IDS) rough-in, White noise, and CCTV systems will be installed. The CCTV camera will monitor the mantrap and have a display for visual verification. Mechanical: The scope of work includes removal and replacement of the existing ductwork and VAV box inside room 401. Fire: Provide modifications to the existing fire alarm devices located in room 401 IAW requirements for SCIF units. All speaker circuits within room 401 will be terminated at an FACP located within the SCIF barrier. All fire alarm/MNS circuits entering the SCIF will be routed through a single wall penetration. ADDITIONAL INFORMATION: Prospective contractors must be registered in the System for Award Management (SAM) database prior to award of a Government contract. Offerors are further advised that failure to register in the SAM database will render your firm ineligible for award. Registration requires applicants to have a DUNS number; recommend registering immediately in order to be eligible for timely award. The solicitation will be available only via the Internet at the following address: http://www.fbo.gov. For information on how to register your company on FBO, to view or receive updates and notifications to the solicitation, please reference the FBO Vendor Guide located on the FBO web site home page. NO paper copies of the impending solicitation will be furnished. This is a secure facility - Access will be limited Requests for site visit(s) are to be arranged by COB Monday, April 12, 2021 1400 CST. Please send an email request to David Clark - david.clark.94@us.af.mil to schedule for base access, dates and times. A date and time will be established at that point. Base access requests (see attachments) will need to be provided for anticipated attendees. 4/22/2021 AMENDMENT 0001 - The attachment of additional specifications 4/22/2021 Questions on FA282321R0015 received by 04/19/2021 answered and attached 4/22/2021 Corrected Section L with attachments attached. This Version supercedes all previous versions 4//22/2021 Amendments: The Government reserves the right to revise or amend the specifications, drawings, or the solicitation prior to the proposal closing time. Such revisions or amendments will be communicated on the beta.SAM.gov site by issuance of the amendment to the solicitation. If such amendment requires material changes in quantities or prices, the proposal closing date may be postponed by enough days to enable offerors to revise their proposals. In such cases, the amendment will include an announcement of the new closing date and time. Offerors MUST acknowledge all amendments in their proposal, either by completing Block 18 of the SF 1442, providing signed copies of the amendments with their proposal (Section III), or by separate letter which includes a reference to the solicitation and amendment numbers. 4/22/2021 All offerors must submit their proposal through the DoD SAFE (Secure Access File Exchange) system found at https://safe.apps.mil/. Offerors must email David Clark (david.clark.94@us.af.mil) and Zachary Schultz (zachary.schultz.7@us.af.mil) with the first and last name(s) of the Points of Contact (POC) submitting the offer on behalf of the offeror, as well as the POC(s) email address(es). This information must be submitted no sooner than fourteen (14) days and no later than eight (8) days prior to the offerors due date. The POC(s) to submit the offer will receive a DoD SAFE email with a link to upload all offer documentation.