Inactive Total Small Business Set-Aside (FAR 19.5)

********PLEASE SEE REVISED SOW for updated part number********* Building 1206 Bays 7 and 8 Camera System Statement of Work 1 October 2019 Scope of Work The scope of work for this project includes the ... ********PLEASE SEE REVISED SOW for updated part number********* Building 1206 Bays 7 and 8 Camera System Statement of Work 1 October 2019 Scope of Work The scope of work for this project includes the purchase and installation of 4 Pelco explosion proof pan-tilt zoom (PTZ) cameras to be installed in Building 1206 and integrated into the existing Pelco Digital Sentry video encoders and recorders. Two cameras will be installed in Bay 7 and two cameras will be installed in Bay 8. These cameras are both a safety and security requirement and will be utilized to remotely monitor explosive machining operations. The vendor shall include in their quote all necessary equipment required to complete the installation, e.g., cameras (with housings), screens, controls, and all associated wiring and connections as outlined below, in addition to the labor costs associated with physical installation of the cameras. Location of Work The cameras will be installed in Bays 7 and 8 of Building 1206. All wiring must be routed back to the control room in the same building. Ill.Period of Performance The anticipated period of performance is 45 days after notification of award. Deliverables Schedule The following table contains the deliverables for the project. Since the duration of the project is short, these deliverables will be due prior to acceptance testing. (SEE ATTACHED SOW FOR TABLE) Applicable Standards Due to the electrical hazard classification of the building and operating bays, all work performed under this contract will comply with National Electric Code (NEC) standards for Division 1, Class 1. Acceptance Criteria Upon completion of the project, the cameras will be tested for functionality to the satisfaction of AFRL/RWMEP. VII Special Requirements Not applicable.