Inactive Total Small Business Set-Aside (FAR 19.5)

This is for market research purposes only. Quotes will not be accepted at this time. This requirement is for CAMSS 20EX40 tents. The requirement are as follows: Item #1: CAMSS20EX40 Cover/End Panel an... This is for market research purposes only. Quotes will not be accepted at this time. This requirement is for CAMSS 20EX40 tents. The requirement are as follows: Item #1: CAMSS20EX40 Cover/End Panel and CAMSS20EX40 Liner CAMSS20EX40 Cover/End Panel P/N: CAMSS2040PF-JBSA - 15 + oz./sq. yd. Mil-Spec 44103D fabric - Boot connectors over entries can be used to connect to other shelters or vestibules - Two (2) sets of two (2) 18” ECU ports with a cable port - Total of ten (10) mesh windows with wind resistant blackout covers (cover and end panel) - Can connect multiple shelters end to end with integrated connector flap - Built in infrared (IR) blocking - Fabric includes UV inhibitors and is mold and rot resistant - Fire resistant fabric that meets NFPA 701 - Cover and ends are radio frequency welded - Each end panel includes mesh attic vent with cover - Includes part number HIT-2040EX-PCT02, HIT-2040EX-PEHD01A, and HIT-PSW01. - No other part numbers other than listed part numbers. CAMSS20EX40 Liner P/N: CAMSS2040HH-JBSA - Minimum 8 oz./sq. yd. Mil-Spec fabric - Liner is flame resistant per test method ASTM D6413 o After flame – 2 seconds max o Char length – 6” max - Air sock runs the length of the shelter and has spot cooling - Includes part numbers HIT-20EX-HAT01, HIT-20EX40-HLM03, HIT-20EX40-LCF01, HIT-20EX-HLER01, HIT-20EX-HLEL01, HIT-20EX-HLS01, HIT-20EX-HLSL01, HIT-20EX-HLSR01, HIT-20EX-LMM, HIT-20EX40-AAS01, and HIT-20EX40-AAE01. - No other part numbers other than listed part numbers. Item #2: 20EX40 Solarfly - P/N: CAMSS-20EX40-SF02-T (Tan) - Withstands 55 MPH sustained winds with 65 MPH wind gust - SolarFly to not increase shelter footprint - No frame component of SolarFly required to anchor to ground - Aluminum support stands are collapsible for low cube transportation - Mesh meets ASTM D6413 for flame resistance - Cover is radio frequency welded for strength and durability - SolarFly designed and verified to fit CAMSS 20EX40 Shelter - SolarFly designed to install on existing CAMSS 20EX40 Shelter without disassembly of shelter or use of mechanical equipment - SolarFly fabric shall be supported every 8' by aluminum frame that is supported by CAMSS 20EX40 Shelter frame to reduce maintenance over time - Fly, stands, rods, ropes and spikes weigh 275 lbs. - Color is item color designated above, which matches shelter color Current Statement of Objective has a typo. Paragraph 4 is suppose to state 8 tents and 4 additional products for future repairs. Responses will be due 16 August 2021 at 12:00pm CST. Please submit a specifications document of what's being provided and capability statement.