Inactive

This is a Market Survey to locate additional sources for the following Selected Parts which are part of the Truck Mounted Mast Group, Hydraulic-Pneumatic OA-9054(V)4/G. NSNs include: 4320-01-259-0796 ... This is a Market Survey to locate additional sources for the following Selected Parts which are part of the Truck Mounted Mast Group, Hydraulic-Pneumatic OA-9054(V)4/G. NSNs include: 4320-01-259-0796 (PN: 5035875-3 CAGE: 80063) – PUMP UNIT, ROTARY 5985-01-126-2477 (PN: 5035394-1 CAGE: 80063) – PNEUMATIC COMPONENT 6110-01-117-8279 (PN: C5078340-1 CAGE: 80063) – DISTRIBUTION BOX 3010-01-668-7226 (PN: C5078302-1CAGE: 80063) – GEAR ASSEMBLY, SPEED 4320-01-226-5466 (PN: 5035746-2 CAGE: 80063) – PUMPING UNIT, HYDRAULIC 5985-01-152-5851 (PN: 5035713-1 CAGE: 80063) – SUPPORT, CYLINDER 5985-01-191-2231 (PN: 5035672 CAGE: 80063) – SUPPORT, ANTENNA 3040-01-207-1850 (PN: 5035618-1 CAGE: 80063) – CYLINDER ASSEMBLY 4320-01-227-0520 (PN: 5035783-1 CAGE: 80063) – PUMP, HYDRAULIC RAM 3040-01-193-7422 (PN: 5035806-3 CAGE: 80063) – CYLINDER ACTUATING, LINEAR 5985-01-163-3644 (PN: 5035602-2 CAGE: 80063) - MAST The Mast Group, Hydraulic-Pneumatic OA-9054(V)4/G elevates communication antennas in the field and the selected parts have been identified for maintenance and sustainment purposes. This acquisition is for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract. The forecast for each NSN ranges from 2-40 per year over five years. The current cage for these selected parts is US Army CECOM, Cage: 80063, at Aberdeen Proving Ground, MD. Detailed technical data for the manufacture or acceptance of these items is available from the Army upon request by following the instructions provided below. Suppliers capable of furnishing these items must so indicate, by writing via email to brian.m.carroll22.civ@army.mil. The response must include production lead time, production capacity by month, surge capacity, number of years part will be available, ranges for price breaks if applicable or any other information that could affect the acquisition, supply, and delivery of the parts. The response should also include documentation such as a copy of a purchase order if the supplier was a vendor to the listed source or a statement from listed source demonstrating that the supplier can, in fact, supply the Army with these parts from the supplier listed above. Successful suppliers may be required to warrant that the item supplied will satisfactorily perform when used for the purpose intended by the Army. For more information contact Brian Carroll, FCDD-ISR-HFF, (540) 808-6532. The deadline for response is 3 August 2022. TDP RECEIPT INSTRUCTIONS: INTERNATIONAL TRAFFIC IN ARMS REGULATIONS: The TDP for this acquisition is subject to the International Traffic in Arms Regulations (ITAR). All technical documents for this item include but is not limited to, test plans, test reports, drawings and specifications contains information that is subject to the controls defined in the International Traffic in Arms Regulation (ITAR). This information shall not be provided to non- U.S. persons or transferred by any means to any location outside the United States Department of State. A company wishing to receive the TDP must have an active status in the Defense Logistics Agency Joint Certification Program (JCP), and must complete the attached NDA. Please email our central inbox DLA_APG_SSA_Posting_Request@dla.mil with the Notice ID (DLA-Aberdeen-xx-xxx) in the subject, the completed and signed NDA attached to the posting, and a copy of your company’s CAGE verification in SAM (System for Award Management). Once the Government has received your NDA, and your company CAGE has been verified to have active status in JCP, we will upload the TDP to DoD SAFE https://safe.apps.mil/. You will then receive an email from DoD SAFE site with a link to the package ID and a password. The TDP may contain drawings in a C4 format. Software to view C4 drawings is available for download through http://www.landandmartitime.dla.mil/Viewers.asp.