Inactive

This is a market survey to locate potential sources to acquire the listed spare parts below. for the AN/VAS-5B DVE. The AN/VAS-5B is an uncooled thermal imaging systems developed for the use of driver... This is a market survey to locate potential sources to acquire the listed spare parts below. for the AN/VAS-5B DVE. The AN/VAS-5B is an uncooled thermal imaging systems developed for the use of drivers operating a multitude of Combat Vehicles (CV), Tactical Wheeled Vehicles (TWV) and platforms that fall under Abrams Combat Vehicle (CV). The system consists of a sensor, a pan and tilt assembly, and display screen. The Driver’s Vision Enhancer (DVE) is a top priority system of the US Army Armor Center and other Training and Doctrine Command (TRADOC) that supports a wide variety of vehicles within Heavy Brigade Combat Team (HBCT), Infantry Brigade Combat Team (IBCT), Stryker Brigade Combat Team (SBCT) and other Active Army and Army National Guard Units. The Acquisition Contract requirements will be as follows: REQUIREMENTS: • The Performance Specification, MIL-PRF-49256D Driver Vision Enhancer – Family of Systems (DVE-FOS), AN/VAS 5A-5B dated 30 September 2009 details the requirements that the supplier will need to meet in order to be considered fully qualified. MIL-PRF-49256D is listed as Distribution Statement C. - Distribution authorized to U.S. Government Agencies and their contractors. Other requests for this document shall be referred to Product Manager Ground Sensors, ATTN: SFAE-IEW-TG, Fort Belvoir, VA 22060. • The Interface Control Document (ICD), A3325865 (REV C) for the DVE-FOS contains the interfaces that the DVE-FOS supplier will need to meet to be considered fully qualified. The specifications contain information that has been designated as “Militarily Critical Technical Data.” Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, and have a valid requirement may obtain a copy of DD Form 2345, Militarily Critical Technical Data Agreement. • Must have the same Form, Fit and Function (F3) of the Items below. Below are the DVE identified Spare parts and components with their corresponding National Stock Numbers (NSN) and/or Part Number for this effort: NSN: 5855-01-661-4313 Part Number: 1000613-201 Description: 17 µm TWV Receiver, Infrared (Sensor Module (SM)) Notice, Response due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this Sources sought announcement (SSA) or reimburse any costs associated with the preparation of responses to this SSA. This SSA is for planning and market research purposes only, and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Technical and Competition Advocate Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the Competition Advocate. The potential vendors will prove they have the capability to manufacture DVE parts listed above. All proprietary and restricted information shall be clearly marked. Technical Points of Contact: PRIMARY POINT OF CONTACT: Vidal Candelaria Electronics Engineer Vidal.candelaria.civ@army.mil SECONDARY POINT OF CONTACTS: Robert Tyndall Chief, Integrated Battlefield Intelligence and Sensors Branch robert.c.tyndall2.civ@army.mil Niklas A. Skinner Contracting Officer's Representative (COR) niklas.a.skinner2.civ@army.mil TDP RECEIPT INSTRUCTIONS: INTERNATIONAL TRAFFIC IN ARMS REGULATIONS: The TDP for this acquisition is subject to the International Traffic in Arms Regulations (ITAR). All technical documents for this item include but is not limited to, test plans, test reports, drawings and specifications contains information that is subject to the controls defined in the International Traffic in Arms Regulation (ITAR). This information shall not be provided to non- U.S. persons or transferred by any means to any location outside the United States Department of State. A company wishing to receive the TDP must have an active status in the Defense Logistics Agency Joint Certification Program (JCP), and must complete the attached NDA. Please email our central inbox DLA_APG_SSA_Posting_Request@dla.mil with the Notice ID (DLA-Aberdeen-xx-xxx) in the subject, the completed and signed NDA attached to the posting, and a copy of your company’s CAGE verification in SAM (System for Award Management). Once the Government has received your NDA, and your company CAGE has been verified to have active status in JCP, we will upload the TDP to DoD SAFE https://safe.apps.mil/. You will then receive an email from DoD SAFE site with a link to the package ID and a password. The TDP may contain drawings in a C4 format. Software to view C4 drawings is available for download through http://www.landandmartitime.dla.mil/Viewers.asp.