Inactive

This is a market survey to locate sources of supply (manufacturers or suppliers) for the Single Channel Ground and Airborne Radio System (SINCGARS) Installation Kits (IKs) and IK Components and the SI... This is a market survey to locate sources of supply (manufacturers or suppliers) for the Single Channel Ground and Airborne Radio System (SINCGARS) Installation Kits (IKs) and IK Components and the SINCGARS Accessories listed by National Stock Number (NSN), procurement part list (PPL) number/part number and item name/nomenclature below: NSN 5975-01-188-8873 A3013367-1 Mounting Base, Electronics Equipment, MT-6352/VRC NSN 5895-01-347-6187 PPL-10490 Installation Kit, Electronic Equipment MK-2694/VRC NSN 5895-01-616-6168 PPL-10711 Installation Kit, Electronic Equipment MK-3174/VRC NSN 5995-01-567-6813 A3307097-1 Wiring Harness, Branched-Adapter, Power Supply (W29) SINCGARS is a family of Very High Frequency-Frequency Modulation (VHF-FM) combat net radios designed to provide the primary means of command and control for combat, combat support, and combat service support units. The SINCGARS radios provide a resistance to jamming via Electronic Counter-Countermeasures (ECCM). The SINCGARS family of radios has the capability to transmit and receive voice and digital data, and is consistent with North Atlantic Treaty Organization (NATO) Interoperability requirements. SINCGARS is the primary soldier-to-soldier communications system and is one of the five major communications/data elements that provide seamless digital communications to the Army end user. SINCGARS IKs are designed to install a specified SINCGARS radio configuration into a specified vehicle. Each IKs contain the different components depends on the SINCGARS radio configuration being installed with the particular IK. The major components contain in these IKs may include Mounting Base, Electrical, MT-6352/VRC; Antenna, AS-3900A/VRC; Handset, H-250/VCEB; Loudspeaker, Control Unit, LS-671/VRC and the various cable assemblies. The First Article Test (FAT) will be required for these items. For the IKs, the FAT will be performed on the abovementioned major components, but not on the IKs. NSN 5995-01-567-6813 A3307097-1 Wiring Harness, Branched-Adapter, Power Supply (W29) is a component of the ON-373B/GRC. The ON-373B/GRC is used in conjunction with Radio Test Set AN/GRM-122 to provide the Direct Maintenance for Ground Single Channel Ground and Airborne Radio System (SINCGARS) Line-Replaceable Units (LRUs). The Accessory Kit, AVIM, GRM-122 is used in conjunction with Radio Test Set AN/GRM-122 to provide the Direct Maintenance for Airborne SINCGARS Line-Replaceable Units (LRUs). Technical Data Package (TDP) for manufacture and acceptance of these items are available from the Government. The complete TDPs, which may include PPLs of the IKs, top level drawings, component level drawings, test requirements for manufacture and acceptance of these IKs and the associate components will be released along with the solicitation. PPLs for the IKs and the top level drawings of the major components of the IKs can be released prior to the release of the solicitation upon request. The TDPs for these IKs and the associate components are subject to the International Traffic in Arms Regulations (ITAR). This information shall not be provided to non-U.S. persons or transferred by any means to any location outside the United States Department of State. Interested source wishing to request for PPLs for these IKs and the top level drawings of the major components of these IKs must demonstrate that your company has an active status in the Defense Logistics Agency Joint Certification Program (JCP) when submitting request to the Government Point of Contract. Interested sources that are capable of manufacturing or supplying any of the items list above must submit enough information to demonstrate their capability to manufacture or supply these items. At a minimum, information submitted should include but is not limited to the following types of documentation: A detail description of your capability of manufacturing or supplying these items and the responses to the questionnaire below. Please complete the attached questions. If a question does not apply, please enter N/A or non-applicable. The information received from this market survey will be evaluated by the Government for the purpose of planning to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. The Government will also use the information, in part, to determine the best acquisition strategy for a potential procurement action and to assist in making future acquisition strategy decisions. This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse interested sources or responders to this notice for any information received and any costs incurred in responding, or for subsequent exchanges of information. Information submitted does not constitute a proposal and is not to be construed as a commitment by the Government, but will be considered an exchange of capabilities and ideas. All SSA responses should be emailed to the Technical and Competition Advocate Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the Competition Advocate. Technical Point of Contact: Stanley Chan - Stanley.U.Chan.civ@mail.mil Competition Advocate Point of Contact: DLA-Aberdeen – Bradley.Holtzapple@dla.mil Responses to this notice should be submitted no later than close of business May 01, 2020.