Inactive Total Small Business Set-Aside (FAR 19.5)

Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Pleas... Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide POCs for these manufacturers if available. All of this information can be submitted to: Bret.Griffin@dla.mil, Phone 614-692-1148. We thank you in advance for your assistance. NSN - 2540-01-255-3347 Drawings can be downloaded by authorized users from the cfolders website https://pcf1x.bsm.dla.mil/cfolders. Offerors are asked to reference the LTC project number CL20192187 in lieu of solicitation number in cFolders. - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. NSN:012553347 PARTS KIT, HULL SEMI-ANNUAL REFERENCE NUMBER:RQ032 REFERENCE NUMBER:RD002 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ001 REFERENCE NUMBER:RQ002 REFERENCE NUMBER:RQ009 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:RQ016 CONTRACTOR CERTIFICATE OF CONFORMANCE REQUIRED REFERENCE NUMBER:RS023 REFERENCE NUMBER:CS147 REFERENCE NUMBER:CS187 REFERENCE NUMBER:ZD080 QUALITY ASSURANCE PROVISIONS (QAPS): PROVIDED I/A/W THE FOLLOWING DRAWINGS<(>,<)> 12273559,12284708,12286856,12387379 AND 12287953. EXCEPTION TO DRAWING 12345800 NOTE 2: MIL-R-2765 BE USED IN LIEU OF MIL-R-3065. PROVIDE 1 EACH OF THE FOLLOWING PART NUMBER 12345800-2, 12345800-3, AND 12345800-4. EXCEPTION TO DRAWING 12961043: GLOVES ALLEGIANCE HEALTHCARE CORP. CAGE 07TA6 PART NUMBER 2D7088 OR MAXIM MEDICAL INC. CAGE 06US7 PART NUMBER 480215 MAYBE USED IN LIEU OF CAGE 89875 PART NUMBER E-011. EXCEPTION TO DRAWING 11610298: CAGE 87405 PART NUMBER CF-308-2PL IS APPROVED BY ESA. EXCEPTION TO DRAWING 12285860 PER CAGE 22627 VENDOR PART NUMBER CHANGED TO 02-03120BG01. EXCEPTION TO DRAWING 5705438: NSN FOR LITHIUM BATTERY ON PAGE 4 SHOULD READ 6135-01-481-7127 IN LIEU OF 6135-01-441-5746. USE MIL-STD-129P W/CHG 2 CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 19207 5705438 REVISION NR AG DTD 08/15/2011 PART PIECE NUMBER: 5705438 IAW REFERENCE QAP 19207 12273559 REVISION NR DTD 03/22/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12287953 REVISION NR F DTD 06/30/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12288306 REVISION NR R DTD 04/12/1996 PART PIECE NUMBER: REFERENCE IAW REFERENCE DRAWING NR 19207 12387272 REVISION NR B DTD 08/09/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11602062 REVISION NR H DTD 08/01/2015 PART PIECE NUMBER: REFERENCE IAW REFERENCE QAP 19207 12284708 REVISION NR D DTD 11/16/2011 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12286856 REVISION NR D DTD 05/10/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12336831 REVISION NR H DTD 11/12/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12336814 REVISION NR K DTD 03/02/2007 PART PIECE NUMBER: 12336814-8, -10 & -11 IAW REFERENCE DRAWING NR 19207 12273563 REVISION NR U DTD 12/10/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12345034 REVISION NR A DTD 09/21/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19206 12312058 REVISION NR A DTD 04/27/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 5911304 REVISION NR D DTD 06/28/2005 PART PIECE NUMBER: 5911304-134 IAW REFERENCE DRAWING NR 19207 11610298 REVISION NR F DTD 03/29/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12273464 REVISION NR C DTD 01/11/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12272827 REVISION NR L DTD 06/06/1995 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9377334 REVISION NR A DTD 09/17/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12286856 REVISION NR K DTD 01/01/1939 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12284544 REVISION NR A DTD 08/07/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19206 7309998 REVISION NR G DTD 07/23/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12288067 REVISION NR C DTD 09/12/1989 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387269 REVISION NR D DTD 08/09/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387299 REVISION NR DTD 02/26/1992 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387349 REVISION NR C DTD 06/13/2017 PART PIECE NUMBER: 12387349-35 IAW REFERENCE DRAWING NR 19207 12472719 REVISION NR DTD 09/28/2000 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12987693 REVISION NR B DTD 03/06/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12273559 REVISION NR I DTD 10/01/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11602061 REVISION NR J DTD 06/01/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12324584 REVISION NR A DTD 11/11/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11641857 REVISION NR F DTD 08/01/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387152 REVISION NR E DTD 06/11/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19206 12528494 REVISION NR A DTD 06/05/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12283641 REVISION NR C DTD 09/25/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12288303 REVISION NR G DTD 07/16/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19206 12529740 REVISION NR C DTD 09/03/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12272684 REVISION NR G DTD 08/27/1998 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12387379 REVISION NR B DTD 05/28/2003 PART PIECE NUMBER: IAW REFERENCE QAP 19207 12287953 REVISION NR DTD 04/16/1993 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705143 REVISION NR G DTD 11/17/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11602063 REVISION NR N DTD 08/01/2015 PART PIECE NUMBER: REFERENCE IAW REFERENCE DRAWING NR 19200 9377106 REVISION NR D DTD 12/17/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12284708 REVISION NR F DTD 05/23/2003 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12301979 REVISION NR B DTD 03/13/1990 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12344039 REVISION NR E DTD 06/24/2005 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12345800 REVISION NR B DTD 04/22/2003 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12387379 REVISION NR C DTD 09/03/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12961043 REVISION NR C DTD 12/14/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81205 NAS1149 REVISION NR K DTD 02/01/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705134 REVISION NR B DTD 05/11/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705155 REVISION NR B DTD 03/16/1988 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705207 REVISION NR C DTD 05/17/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11610232 REVISION NR B DTD 08/01/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 11641744 REVISION NR C DTD 08/01/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12282157 REVISION NR K DTD 03/06/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 80205 NAS1149 REVISION NR 2 DTD 08/29/1994 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285860 REVISION NR L DTD 08/08/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705135 REVISION NR E DTD 05/11/1987 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12373562 REVISION NR U DTD 09/02/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705438 REVISION NR DTD 08/31/2016 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 5705438 REVISION NR S DTD 03/12/2012 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12285860 REVISION NR K DTD 07/18/2016 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z UNIT CONT:ZZ OPI:A INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 PACKAGING SHALL BE IN ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION AK12553347. ************************************************************************************************************ GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT REFERENCE NUMBER RQ032 RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. REFERENCE NUMBER RD002 RD002, COVERED DEFENSE INFORMATION APPLIES REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RQ001 RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) REFERENCE NUMBER RQ002 RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) REFERENCE NUMBER RQ009 RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER RQ016 RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML)" APPLY. REFERENCE NUMBER RS023 RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item. REFERENCE NUMBER CS147 "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST CONFORM TO SOURCE CONTROL DRAWING. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE SOURCE CONTROLLED COMPONENTS FROM SOURCES APPROVED ON THE APPLICABLE SOURCE CONTROL DRAWING." REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REFERENCE NUMBER ZD080 SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.