LTC Project SPE7LX20R0109
This synopsis for an upcoming solicitation is being issued to establish an Indefinite Quantity Contract (IQC) that will provide stock replenishment coverage in support of military depots. The NSNs spe... This synopsis for an upcoming solicitation is being issued to establish an Indefinite Quantity Contract (IQC) that will provide stock replenishment coverage in support of military depots. The NSNs specified in Section B of the solicitation are Other Than Full and Open Competition. Section B includes 2 NSNs with one (1) approved source of supply. The following is the NSN data: NSN 2520015791379 CONTROL ASSEMBLY, TR - Approved source of suply and Part Number - Powertrain Control Solutions (4WR67) / PN TCM2100BB, Annual Demand Quantity 1,167 NSN 2520015792302 CONTROL ASSEMBLY, TR - Approved source of supply and Part Number - Powertrain Control Solutions (4WR67) / PN TCM2100AB, Annual Demand Quantity 5,679 Additional NSN data: Unit of Issue is each, FOB is Origin, Inspection and Acceptance is Destination. The solicitation will be available on DLA's Internet Bid Board Site (https://www.dibbs.bsm.dla.mil/RFP/) on or about 5/25/2020. All offers shall be in the English language and in US dollars. All responsible sources may submit an offer which shall be considered. The total duration of the procurement shall not exceed 5 years. This proposed procurement includes items within the Federal Supply Class/FSC 2520. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, surge and sustainment and other evaluation factors as described in the solicitation. Based upon market research, the Government is using the policies contained in Part 12, Commercial Items, in its solicitation for the described supplies or services. TYPE OF SET-ASIDE: 100% Small Business Set Aside (SBSA) Product Information Data (PID): CLIN: 0001 NSN: 2520015791379 CONTROL ASSEMBLY, TRANSMISSION. REFERENCE NUMBER:RA001 REFERENCE NUMBER:RP001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CA061 CRITICAL APPLICATION ITEM POWERTRAIN CONTROL SOLUTIONS LLC 4WR67 P/N TCM2100BB PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A UNIT CONT:E5 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:040 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 ADDITIONAL SPECIAL MARKING REQUIREMENTS: EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, SERIAL NUMBER, LOT NUMBER, BATCH NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER CAGE CODE, AND PART NUMBER. REFERENCE NUMBER:IP025 CLIN: 0002 NSN: 2520015792302 CONTROL ASSEMBLY, TRANSMISSION. REFERENCE NUMBER:RP001 REFERENCE NUMBER:RA001 REFERENCE NUMBER:RQ011 REFERENCE NUMBER:CS241 REFERENCE NUMBER:CS199 CRITICAL APPLICATION ITEM POWERTRAIN CONTROL SOLUTIONS LLC 4WR67 P/N TCM2100AB IAW REFERENCE DRAWING NR 19207 12447170 REVISION NR A DTD 05/09/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12273343 REVISION NR E DTD 07/15/2002 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12447168 REVISION NR B DTD 05/02/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460139 REVISION NR A DTD 04/30/2013 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460400 REVISION NR DTD 06/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460401 REVISION NR DTD 06/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460402 REVISION NR DTD 06/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460403 REVISION NR DTD 06/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460404 REVISION NR DTD 06/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460405 REVISION NR DTD 06/19/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460406 REVISION NR DTD 06/19/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460407 REVISION NR DTD 06/11/1998 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12369021 REVISION NR C DTD 05/14/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460399 REVISION NR B DTD 07/12/2011 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12447169 REVISION NR B DTD 10/25/2000 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12285280 REVISION NR G DTD 05/16/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12480715 REVISION NR DTD 08/09/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460423 REVISION NR DTD 10/22/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460423 REVISION NR G DTD 02/05/2014 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 34623 5717576 REVISION NR B DTD 10/20/2018 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B UNIT CONT:D3 OPI:O INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 REFERENCE NUMBER:IP025 ************************************************************************************************************ GLOSSARY ************************************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. REFERENCE NUMBER RP001 RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT REFERENCE NUMBER RQ011 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES REFERENCE NUMBER CA061 ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER IP025 IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS REFERENCE NUMBER CS241 NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY. REFERENCE NUMBER CS199 ALTERNATE OFFEROR REQUIREMENTS: THE FOLLOWING DOCUMENTATION IS REQUIRED IN ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS AND SPECIFICATIONS REQUIRED FOR MANUFACTURE. (B) PROCESS/OPERATION SHEETS WHICH DESCRIBE IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED INSPECTION/ACCEPTANCE CRITERIA. (C) IDENTIFICATION OF SOURCES WHO WILL PERFORM CRITICAL PROCESSES/OPERATIONS, INCLUDING SOURCES OF FORGINGS AND CASTINGS. (D) IF AVAILABLE COPIES OF PURCHASE ORDERS FROM THE ITEM. (E) A SHOCK EXTENSION REPORT IN ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS SPECIFIED IN DI-ENVR-80706 IS REQUIRED. IF THE OEM'S DETAILED DRAWINGS ARE NOT AVAILABLE, THE OFFEROR MUST SUPPLY AN ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY, IF REVERSE ENGINEERING WAS USED, THE COMPLETE PROCEDURE WILL BE REPORTED INCLUDING: NUMBER OF SAMPLES, METHODS AND MEASURES USED, ALL DATA COMPILED, RATIONALE FOR DIMENSION TOLERANCE DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS DATA WILL BE FORWARDED TO THE ENGINEERING SUPPORT ACTIVITY FOR EVALUATION.
Data sourced from SAM.gov.
View Official Posting »