Inactive Total Small Business Set-Aside (FAR 19.5)

NSN 2540-01-706-1173, INSTALLATION KIT, VE. This material is being procured in accordance with Basic Drawing. Installation Kit, VH The required quantity is 900 each with a 0% quantity option to be shi... NSN 2540-01-706-1173, INSTALLATION KIT, VE. This material is being procured in accordance with Basic Drawing. Installation Kit, VH The required quantity is 900 each with a 0% quantity option to be shipped to DODAAC (SW3227) Red River, TX with a required delivery of 250 days. FOB Origin (First Destination Transportation applies) and Inspection and Acceptance at Destination are required. This solicitation is set-aside for small business. This material is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item.[DRR(CDLAM1] However, interested suppliers may identify to the Contracting Officer their interest and capability to satisfy the Government’s requirement with the commercial item within 15 days of this notice. This solicitation will be available on the Internet at https://www.dibbs.bsm.dla.mil// after the issue date of 09/09/2024. Due to system constraints, it may take as long as 3 business days from the stated issue date for the solicitation to post to DIBBS. Technical drawings/bid sets are available.[DRR(CDLAM2] Hard copies of this solicitation are not available. While price may be a significant factor in the evaluation of offers, proposals will be evaluated according to “best value” procedures on the basis of Price, Past Performance, and Delivery[DRR(CDLAM3] . All offers shall be in English and in US dollars. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the US by the Trade Agreements Act of 1979.[DRR(CDLAM4] DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within three business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses. [DRR(CDLAM5] Technical drawings/bid sets are available 09/092024on the Internet at https://www.dibbs.bsm.dla.mil/ through ‘cFolders’ under the ‘Technical Data’ tab. Requests should include the RFP number, opening/closing date, NSN, PR number, buyer’s name and your complete name and address. FEDERAL, MILITARY AND COMMERCIAL SPECIFICATIONS CANNOT BE PROVIDED BY DSCC. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST-Quick Search and in most cases can be downloaded directly via the Internet using standard browser software. Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shipping Wizard after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DODSSP Special Assistance Desk at (215)697-6396/6257 (DSN: 442-6396/6257). Users without access to the Internet may contact: DODSSP Bldg. 4/D 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Description, etc., are not stocked at the DODSSP. [DRR(CDLAM6] UPLOAD PROPOSAL THROUGH DIBBS (PREFERRED METHOD) To submit an offer through DIBBS, search for the solicitation and then click the Red "Offer" button on the search results screen (Note: users must be logged in to DIBBS in order to submit the offer through DIBBS). For additional guidance, refer to https://www.dibbs.bsm.dla.mil/refs/help/Solicitations/DIBBS-Upload-Offer-User-Help.pdf EMAIL PROPOSALS TO: Jennifer.Payne@dla.mil A single email cannot exceed 15 MB. Proposals greater than 15 MB must be divided into multiple emails. [DRR(CDLAM1]SELECTION x5 (as applicable) [DRR(CDLAM2]SELECTION x1 [DRR(CDLAM3]ADD Socioeconomic factors (if applicable) [DRR(CDLAM4]DELETE (if NOT FSGs 22, 23, 24, 25, 26, 29, 30, 32, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 53, 54, 55, 56, 61… it keeps going; they aren’t going to be used) [DRR(CDLAM5]DELETE (if NOT JCP) [DRR(CDLAM6]DELETE (if NOT drawing)

Inactive

Contract Specialist: Jennifer Payne Email: Jennifer.Payne@dla.mil NSN: 2540-01-706-1173 Approved Source(s) –No approved sources ------------------------------------------------------------------------... Contract Specialist: Jennifer Payne Email: Jennifer.Payne@dla.mil NSN: 2540-01-706-1173 Approved Source(s) –No approved sources ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for the NSN listed above is “2G” AMC "2" Suitable for competitive acquisition. (See Notes 1 and 2.) AMSC "G" The Government has rights to the technical data, the data package is complete, and there are no technical data, engineering, tooling or manufacturing restrictions. (This is the only AMSC that implies that parts are candidates for full and open competition. Other AMSCs such as K, M, N, Q, and S may imply limited competition when two or more independent sources exist, yet the technical data package is inadequate for full and open competition.) AMCs 1 or 2 are valid. ---------------------------------------------------------------------------------------------------------- Please review the NSN listed above and provide any sources that may be able to manufacture these items. The approved sources for this NSN are currently listed above. All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above. Should a company wish to be reviewed and qualified as an “Approved Source”, they may submit an application package through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring. For further information, please reference the DLA Land Maritime web page shown below and click on the highlight: Alternate Offer/Source Approval Program for detailed explanation for the information and format necessary for a SAR and for the SAR approval process. http://www.landandmaritime.dla.mil/programs/altofferor/ Thank you in advance for your assistance.