Inactive Total Small Business Set-Aside (FAR 19.5)

The Contractor shall provide all design, labor, materials, tools, and equipment necessary to provide and replace new electric, water and natural gas meters to the building listed in Attachment 1 to Au... The Contractor shall provide all design, labor, materials, tools, and equipment necessary to provide and replace new electric, water and natural gas meters to the building listed in Attachment 1 to Automated Meter Reading Software (AMRS). Work shall be accomplished in accordance with the detailed scope in PWS attached . Gas Meters : Gas Meters- All new gas meters shall be replaced one for one and be capable of delivering consumption data into the AMRS. The new meters shall be scaled accurately by the contractor and meet UFGS 32 51 13.00 30 and meet the requirements of gas meters specified in the Air Force Meter Data Management Plan. Specifications are otlined in PWS attached. Water Meters: Water Meters – All new water meters shall be replaced one for one and be capable of delivering consumption data into the AMRS. The new meters shall be scaled accurately by the contractor and meet UFGS 33 11 00 and meet the requirements of water meters specified in the Air Force Meter Data Management Plan. Water Meters – All new water meters shall be replaced one for one and be capable of delivering consumption data into the AMRS. The new meters shall be scaled accurately by the contractor and meet UFGS 33 11 00 and meet the requirements of water meters specified in the Air Force Meter Data Management Plan. Specifications are outlined i nthe PWS attached. Electric Meters: Electric Meters – All new water meters shall be replaced one for one and be capable of delivering consumption data into the AMRS. The new meters shall be scaled accurately by the contractor and meet UFGS 26 27 14.00 20 and meet the requirements of electric meters specified in the Air Force Meter Data Management Plan. Specifications are atatched in PWS attached. Required for Electric Meters only. Electrical Meter Specifications: The following list of meters were evaluated, meet the AMRS meter specification and shall function within the AMRS platform. All networked devices, their integrated firmware and software will be approved by the PMO for use in the AMRS. PMO approval is contingent upon the device, in its fielded configuration, passing USAF cyber and AMRS compatibility testing. Meters not on the approve list shall be tested and approved by the government at Contractor’s expense. Schneider Electric ION8600 Schneider Electric PM8000 Electro Industries Nexus 1272 Electro Industries Nexus 1262 Schneider Electric PM5560 Schneider Electric PM800 with PM8ECC network card Testing process: Meters submitted will go thru a destructive and non-destructive PIN testing, as well as network and software integration testing. Manufactures must provide full firmware code and firmware versions. All meters must provide full data and adjustable sampling rates as required by the AF AMRS software. Meters at a minimum must meet cybersecurity requirements as identified in (AMRS – Advanced Meter Reading System). Multiple meters may be required to accomplish this. All meters provided will be retained by the AF for ongoing patching and analysis in support of a security configuration guide. Any device submitted must communicate using MODBUS TCP-IP and integrate with the AF enterprise AMRS software. Devices must also comply with standards in UFC 4-010-06 and be approved under a system authority to operate under DODI 8510.01.