Inactive

The United States Air Force, AFLCMC/PZIBA, Wright-Patterson AFB, Ohio 45433-5344. This is a synopsis published for informational purposes only. This proposed action is for the acquisition of Connext S... The United States Air Force, AFLCMC/PZIBA, Wright-Patterson AFB, Ohio 45433-5344. This is a synopsis published for informational purposes only. This proposed action is for the acquisition of Connext Surgical Matrix. It was determined that Ventris Medical is the only source available to provide the product meeting the Governments specifications in the attached Statement of Work. The Government intends to solicit and negotiate with only one source under the authority of FAR 13.106-1(b)(1), resulting in a firm fixed price contract. The proposed procurement will be a Sole Source under North American Industry Classification Systems Code (NAICS) 339113. Size standard is 750 employees. The proposed source is the manufacturer of the items, Secada Medical, LLC, dba. Vetris Medical.1201 Dove Street, Suite 470. This notice of intent is not a request for competitive quotations. However, all responsible sources may submit a capability statement, proposal, quotation, or exception to the intent to purchase on a sole source basis, which shall be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. In order to comply with FAR 5.207(c)(15), the reason for lack of competition is as follows: Ventris Medical is the only known source capable of meeting the Government’s requirements. Therefore it is in the best interest of the Government to award to Secada Medical. LLC, dba. Ventris Medical. Please see Attachment 2, Sole Source Justification, for more complete details. Important Notice to Contractors: All prospective awardees are required to register at the System for Award Management (SAM) and to maintain active registration during the life of the contract. SAM can be accessed at https://www.sam.gov. Any information should be emailed to kate.broderick@us.af.mil. Only inquires/information received through email by this date will be considered. Be advised all correspondence sent via email shall contain a subject line that reads “Connext Surgical Tissue”. Note that email filters at WrightPatterson AFB are designed to filter emails without subject lines or with suspicious subject lines or contents (i.e., exe. Or .zip files). Also be advised that .zip or .exe files are not allowable attachments and be deleted by the email filters at Wright-Patterson AFB. If sending attachments with email, ensure only .PDF, .doc, or .xls documents are sent. Attachments: 1. Statement of Work (SOW) 2. Sole Source Justification (SSJ) Redacted

Inactive

DLA Troop Support is seeking industry feedback from interested parties concerning the manufacturing for:NSN 4240-01-529-8327 OUTSERT,CLEAR ASSEM RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has t... DLA Troop Support is seeking industry feedback from interested parties concerning the manufacturing for:NSN 4240-01-529-8327 OUTSERT,CLEAR ASSEM RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ003: CONFIGURATION CHANGE MANAGEMENT FOR EDGEWOOD FOR CHEMICAL, BIOLOGICAL CENTER MATERIALS - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST CONFORM TO SOURCE CONTROL DRAWING. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE SOURCE CONTROLLED COMPONENTS FROM SOURCES APPROVED ON THE APPLICABLE SOURCE CONTROL DRAWING." NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THE SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. This is an identified Chemical Biological Defense Equipment item. All requests for variances (formerly called waivers or deviations), both pre and post award, must be approved by the appropriate Joint Program Executive Office Chemical, Biological, Radiological, and Nuclear Defense (JPEO-CBRND) Engineering Support Activity (ESA) prior to final approval. All packaged items of supply shall be marked IAW MIL-STD-129. Military packaging is required. Requirements defining levels of packaging shall be IAW MIL-STD-2073-1. If Special Packaging Instructions (SPI) are provided in the technical data package (TDP), the SPI's requirements will take precedence over MIL-STD-2073-1 where applicable. For all Chemical Biological Items, the First Article Test waiver timeframe is reduced to one (1) year<(>,<)> (note: do not use a DD Form 1694 "Request for Variance (or Waiver)" for a FAT waiver). This supersedes the three (3) year waiver timeframe allowed in Procurement Note H03- Supplemental First Article Testing Requirements. The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. The following Engineering Clauses apply only if selected: No shelf life markings are required There is no GFP on this contract. SECTION C - ENGINEERING EXCEPTIONS The following Engineering Exceptions shall apply to this procurement: ANSI MH1, if required, can. Government loaned property specified in paragraph 3.6 of EA-O-2249 w/ Amendment 4, is already at the contractor facility. CRITICAL APPLICATION ITEM Avon Protection Systems, Inc. 1LEW5 P/N 71014/12 IAW BASIC DRAWING NR 81361 5-1-4327 REVISION NR DTD 12/19/2018 PART PIECE NUMBER: IAW REFERENCE QAP 16236 CDRL-ECBCPLTC-17333 REVISION NR DTD 11/30/2017 PART PIECE NUMBER: IAW REFERENCE QAP 16236 CDRL-ECBCFATC-17333 REVISION NR DTD 11/30/2017 PART PIECE NUMBER: IAW REFERENCE QAP 16236 CDRL-ECBCQPP-15062 REVISION NR DTD 03/03/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 26-19-51 REVISION NR H DTD 11/17/1997 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 PRF-EA-D-2166E REVISION NR DTD 06/27/2017 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 PRF-EA-0-2249W/AM3 REVISION NR DTD 06/20/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81363 5-1-4327 REVISION NR A DTD 11/14/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81363 5-1-4327 REVISION NR DTD 01/24/2020 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 5-1-4328 REVISION NR A DTD 01/22/2020 PART PIECE NUMBER: IAW REFERENCE QAP 14153 SQAP-015298327 REVISION NR DTD 01/27/2020 PART PIECE NUMBER: IAW REFERENCE QAP 81361 5-1-4328 REVISION NR DTD 12/18/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 5-1-4327 REVISION NR DTD 11/13/2019 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 81361 5-1-4327 REVISION NR DTD 10/29/2019 PART PIECE NUMBER: Suppliers capable of furnishing these items must so indicate by email at Reginald.armstead@dla.mil or in writing to: DLA Troop Support ATTN: FCF- Reginald B Armstead 700 Robbins Avenue Building 3 Philadelphia, PA 19111 The contractor will be required to manufacture these items and satisfy the Government's delivery requirements. Responses to this survey must include documentation citing the following: -Contractor's experience demonstrating the capability to meet the Government's requirements in producing products that meet all performance requirements, and that are physically and functionally interchangeable with presently identified item. -Quality Standard (Government or Industry) that shall be in place for this effort. -Past Performance for the same or similar items. The contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same or similar items for which they have production experience. Government contract numbers, if applicable, shall be provided. -The contractor must provide information to show it possesses, or shall possess, adequate production plant facilities (equipment, tooling, and space) to enable it, or its subcontractors, to meet production delivery requirements for these items.