Inactive

The F-35 Lightning II Joint Program Office (JPO) intends to award a sole source contract to Systecon North America dba WPI Services, LLC (Systecon) for the developmental, implementation and engineerin... The F-35 Lightning II Joint Program Office (JPO) intends to award a sole source contract to Systecon North America dba WPI Services, LLC (Systecon) for the developmental, implementation and engineering efforts necessary to support the Analytics and Reporting for Enterprise Sustainment (ARES) Tool, Balancing & Estimating Strategic Sourcing Tool (BESST), and annual Opus software upgrades, including Tier 1 & 2 support powered by Opus Suite software. The F-35 JPO requires support for the Opus Suite software, to include installation and population with F-35 Lightning II strategic sourcing data and associated commercially available interfacing architecture. This acquisition is being pursued on a sole source basis under the statutory authority of 10 U.S.C. 3204(a)(1) (formerly 10 U.S.C. 2304(c)(1)), as implemented by Federal Acquisition Regulation (FAR) 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. Services covered under this requirement will result in the execution of twork necessary to deliver sustainment analytic and digital management tools to support the U.S. Air Force (USAF), U.S. Navy (USN), U.S. Marine Corps (USMC). F-35 International Partners and Foreign Military Sales (FMS) customers to meet requirements identified in the Autonomic Logistics Information System (ALIS) Capability Development Document and follow on Global Support Systems initiative requirements. The BESST, OPUS, and ARES contract is anticipated to be awarded during third quarter of FY2024. This notice of intent is neither a request for proposal nor a solicitation of offers. However, in accordance with FAR 5.207(c)(16)(ii), all responsible sources may submit a capability statement, proposal, or quotation that will be considered by the U.S. Government. Based upon any responses to this notice, the U.S. Government reserves the right to process this procurement action on a sole source basis.

Inactive

The Naval Air Warfare Center Aircraft Division, Lakehurst in support of the Prototype, Manufacturing, and Test Division (PMTD), is seeking sources that can provide a Horizontal Proof Load System for t... The Naval Air Warfare Center Aircraft Division, Lakehurst in support of the Prototype, Manufacturing, and Test Division (PMTD), is seeking sources that can provide a Horizontal Proof Load System for the Environmental Test Laboratory (ETL). Scope of work as follows: REQUIREMENTS 2.1 Horizontal Proof Load System One horizontal proof load machine capable of performing (at the minimum) the following requirements: Tension and Compression capacity of at least 500,000 lbs. Load cell accuracy of +/-.5% or better Machine capable of performing failure testing (break testing) 3’ hydraulic stroke minimum Usable test article working length of 30’ minimum Linear Variable Differential Transformer (LVDT) installed for precise distance measurements with resolution down to +/- .005” Hydraulically / electrically controlled safety cage Frame does not require any anchoring and/or additional reinforcement to floor Machine to include integrated Hydraulic Power Unit (HPU). If a computer is included, it must operate using Windows 10. Power available for machine is 60 Hz 480V - 3 phase, 60 Hz 240V – 1 phase, and 60 Hz 120V – 1 phase. Compressed air available for machine up to 120 PSI. Any additional software for operation is included with purchase and must be compatible with Windows 10 Operating System First fluids filling and/or calibration, if applicable, must be included with overall machine cost On-Site training for equipment operation and maintenance for four people. Warranty covering parts and labor for a minimum of 1 year Hard/printed copies of user / maintenance manuals, detailed parts list with suppliers, and electrical / mechanical schematic for machine, 2 copies of each Digital copies of user / maintenance manuals, detailed parts list with suppliers, and electrical / mechanical schematic for machine CAD files for electrical / mechanical schematic Delivery, rigging, and installation and setup of machine must be included using contractor tools and labor. This includes any crane support, forklift support, leveling / shimming, packaging storage, dunnage, and final connection to utilities that we will provide within 20 ft of the installation location. Machine must fit through a 138” Wide x 136” Tall roll up door (can be disassembled / reassembled if required). 2.2 Contract Options Preventative maintenance and/or calibration service on equipment for length of warranty 2.3 Government Inspection and Acceptance Government personnel shall complete inspection and acceptance of the unit at the destination after machine start up and training have been completed. 3.0 PACKAGING, PRESERVATION AND SHIPPING Shipments shall be packaged and transported (FOB Destination) via safe, secure, reliable, and traceable means of transportation and provide protection from normal climatic/weather conditions and incidental mishandling during shipping to prevent any damage or loss during shipment. All shipments under this contract shall be addressed to the NAVAIR Lakehurst Staging Facility as indicated below. Shipping costs need to be incurred by the contractor who is doing the shipping. All exterior shipping containers/packaging shall at a minimum be marked with the information listed above and the Contract Number. Joint Base MDL, New Jersey 08733 Responses to this RFI shall be sent by e-mail to Danielle Russo at danielle.m.russo4.civ@us.navy.mil by the date and time designated in this posting. THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes. It does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not at this time seeking proposals and will not accept unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party's expense. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov website. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement.

Inactive Total Small Business Set-Aside (FAR 19.5)

The contractor shall provide all labor, management, supervision, tools, materials, and equipment required to perform finishing of gym floor services at various locations throughout the MCBCL, MCAS, Ne... The contractor shall provide all labor, management, supervision, tools, materials, and equipment required to perform finishing of gym floor services at various locations throughout the MCBCL, MCAS, New River, Jacksonville, Camp Geiger, Camp Johnson, Rifle Range, and Court House Bay, NC.. The contract will be for a base year and four (4) option years, 60 maximum.