Inactive

BACKGROUND Semiconductor manufacturing yield enhancement requires ongoing risk analysis of cleaning chemical purity wherein critical contaminants are already at levels difficult or impossible to detec... BACKGROUND Semiconductor manufacturing yield enhancement requires ongoing risk analysis of cleaning chemical purity wherein critical contaminants are already at levels difficult or impossible to detect, let alone identify and quantify. Next generation chips will require even purer materials and advanced metrological capabilities for the detection, identification, and quantification of impurities in semiconductor cleaning chemicals necessitating a practical roadmap for assessing material purity commensurate with the needs of the next generation in semiconductor manufacturing. The International Roadmap for Devices and Systems (IRDS) has identified that a “Lack of proven particle metrology limits the ability to confirm whether UF (ultrafiltration of Ultra-Pure Water [UPW]) is effective in controlling killer size particles down to the critical particle size. Aerosol-based testing of UF will require nebulizing and drying a UPW stream to form an aerosol and simultaneously measuring the upstream and downstream particle size distributions and number densities. This aerosolization process directly mimics what occurs on-wafer. These aerosol-based methods are quickly gaining acceptance and NIST research would speed these efforts. Specifically, we require a nano-differential mobility analyzer (nano-DMA) and water-based condensation particle counter (w-CPC) to upgrade an existing TSI scanning mobility particle sizer (SMPS) to a nano-SMPS. The nano-DMA and w-CPC upgrades will allow the SMPS to rapidly measure the size distribution and number density of sub-50 nm particles with a limit of detection (LOD) approaching 2 nm that, through optimization, could be ? 1.5 nm. The current SMPS system already contains the electrostatic classifier and non-radioactive charge neutralizer components. The nano-DMA and w-CPC will be used in a standard indoor chemistry laboratory with temperatures between 18 °C and 24 °C and relative humidities between 20 % and 80 % (non-condensing) and standard 120 V 20 A/30A power. The nano-SMPS serves as one component in a larger system designed to measure the efficiency of a laboratory-scale UF system that has been configured for the quantitative determination of UF efficiency to particles with sizes spanning ? 1 nm to ? 50 nm and a range of chemistries and morphologies (e.g., spherical, rod, etc.). Ideally, the nano-SMPS system can be applied to similar UF measurements in other cleaning chemicals such as isopropyl alcohol, hydrogen peroxide, ammonia, and dilute hydrochloric acid. NIST is seeking information from sources that may be capable of providing a commercial solution that will achieve the objectives described above. In addition to the above, below are additional line-item descriptions that includes specifics on essential requirements: Line Item 0001: Nano-differential mobility analyzer (nano-DMA) Description: particle size selector for generating monomobile aerosol stream with particles of known size from a polydisperse aerosol input. Quantity: 1 Technical Specifications Capable of classifying particles in the range of 2 nm to 150 nm. Plug-and-play compatible with our existing 3 x TSI 3080 Electrostatic classifiers and 1 x 3082 Electrostatic classifier. Line Item 0002: Water-based condensation particle counter Description: particle counter for determining the number density of particles exiting the nano-DMA Quantity: 1 Technical Specifications Utilizes water as the working fluid. Default operation capable of counting 2.2 nm particles with ? 50 % efficiency that can be user-optimized to ? 1.6 nm. Single particle counting up to 2 × 105 cm-3. Plug-and-play compatible with our existing 3082 Electrostatic classifier. Utilizes USB or ethernet to connect to a host computer. Utilizes 120 VAC. HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and “active” in SAM at the time of solicitation response. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI). Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government’s requirement, provide the following: Manufacturer name Model number Technical specifications If your company is not the manufacturer, provide information on your company’s status as an authorized reseller of the product(s) Describe performance capabilities of the product(s) your company recommends to meet the Government’s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase. State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company’s published prices for equipment and services. If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 5 days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. IMPORTANT NOTES This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a synopsis and solicitation may be published on GSA’s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). The responses shall not exceed 5 pages including all attachments, charts, etc. Thank you for taking the time to submit a response to this request!