Inactive

BACKGROUND The National Institute of Standards and Technology (NIST) RF technology division is seeking inspection microscope components to build custom manual probe stations dedicated to the character... BACKGROUND The National Institute of Standards and Technology (NIST) RF technology division is seeking inspection microscope components to build custom manual probe stations dedicated to the characterization of active devices and circuits above 100 GHz. The solution must include 4k cameras, objective lenses of several magnifications, and manual Z focus blocks. This solution will enable transistor large-signal characterization that will be used to extract and validate transistor models under the CHIPS program. NIST is seeking information from sources that may be capable of providing a commercial item solution that can perform within the capabilities described within this notice. The solution shall consist of 5 units of 4k resolution microscope camera, 4 units of 10x long working distance microscope objective lens, 2 units of 5x long working distance microscope objective lens, 1 unit of 2.5x long working distance microscope objective lens, 1 unit of 20x long working distance microscope objective lens, and 6 units of manual Z focus block. The specifications regarding these products are listed below.? Item 1: 4k resolution microscope camera - Quantity: 5 • 4k resolution: 3840 x 2160 pixels or greater • 30 frames per second (fps) readout or higher • HDMI and USB3 output at full 4k resolution and 30 fps or higher • RGB color image sensor with size no larger than 8 mm x 5 mm • Visible wavelength response from 400 nm to 750 nm • Camera body with tripod mounting thread and volume no larger than 100 mm x 80 mm x 70 mm • C-mount lens interface • Computer mouse input • Software internal to camera for digital zoom and dimensional measurements • Host computer software included with basic onscreen line drawing and dimensional measurement capability • Sill image (JPEG, TIFF) and MPEG video recording Item 2: 10x long working distance microscope objective lens - Quantity: 4 • 10x magnification, infinity corrected, plan APO optical design • Working distance greater than 38 mm • Numerical aperture (NA) greater than 0.2 • M26 x 0.706 mm mounting thread • 95 mm parfocal distance • 200 mm tube lens design • Visible wavelength transmission from 400 nm to 750 nm • Outer diameter no larger than 34 mm • Field number of 22 mm or greater Item 3: 5x long working distance microscope objective lens - Quantity: 2 • 5x magnification, infinity corrected, plan APO optical design • Working distance greater than 36 mm • Numerical aperture (NA) greater than 0.15 • M26 x 0.706 mm mounting thread • 95 mm parfocal distance • 200 mm tube lens design • Visible wavelength transmission from 400 nm to 750 nm • Outer diameter no larger than 34 mm • Field number of 22 mm or greater Item 4: 2.5x long working distance microscope objective lens - Quantity: 2 • 2.5x magnification, infinity corrected, plan APO optical design • Working distance greater than 32.5 mm • Numerical aperture (NA) greater than 0.05 • M26 x 0.706 mm mounting thread • 95 mm parfocal distance • 200 mm tube lens design • Visible wavelength transmission from 400 nm to 750 nm • Outer diameter no larger than 34 mm • Field number of 22 mm or greater Item 5: 20x long working distance microscope objective lens - Quantity: 1 • 20x magnification, infinity corrected, plan APO optical design • Working distance greater than 22 mm • Numerical aperture (NA) greater than or equal to 0.35 • M26 x 0.706 mm mounting thread • 95 mm parfocal distance • 200 mm tube lens design • Visible wavelength transmission from 400 nm to 750 nm • Outer diameter no larger than 34 mm • Field number of 22 mm or greater Item 6: Manual Z focus block - Quantity: 6 • Cross roller bearing stage for Z focusing of inspection microscope • Rack and pinion manual focusing mechanism with coarse and fine adjustment knobs • Concentric placement of coarse and fine adjustment knobs • Fine focus with 0.1 mm motion per revolution • +/- 25 mm Z travel range • M4 clearance hole pattern with greater than 4 screw holes and greater than 25 mm hole spacing for mounting inspection microscope • M4 tapped hole pattern for mounting focus block to XY axis positioner: pole stand mounting is not acceptable as the only mounting for the focus block • Load capacity of 40 kg or greater for supporting inspection microscope • Body excluding knobs no larger than 150 mm x 110 mm x 80 mm HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORRMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact specialist listed at the bottom of this notice as soon as possible, and preferably before the closing date and time of this notice. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI). Identify laboratory equipment that your company sells that is of the nature addressed in the BACKGROUND section of this notice. Include brand name, make, model, and/or other distinguishing information. State if your company is the manufacturer of the identified equipment or is a retailer or wholesaler that normally sells the identified equipment. If the latter, indicate whether the manufacturer authorized in writing for your company to sell the identified equipment on behalf of the manufacturer. Describe performance capabilities and relevant or beneficial physical and functional features for any equipment you identified to satisfy the NIST-identified minimum specifications described in this notice. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section above that could be viewed as unduly restrictive or contain unnecessary barriers that adversely affect your ability to fully participate and indicate why. In such a scenario, please offer suggestions for how the market research notice and draft minimum specifications could be made more inclusive and competitive. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the aforementioned equipment such as: delivery time after your company accepts the order; FOB shipping terms: manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the aforementioned equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested inspecting the intended installation site during the market research phase. State published price, discount or rebate arrangements for aforementioned equipment and/or provide link to access company’s published prices for equipment and services. State whether the aforementioned equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details. If the aforementioned equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors in which you provided the aforementioned or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received by 12:00 pm EDT on June 21, 2024. Questions will be anonymized and answered via sources sought notice amendment following the question submission deadline. IMPORTANT NOTES The information received in response to this notice will be reviewed and considered so that NIST may appropriately solicit for its requirements in the near future. This notice should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. Responses will not be considered as proposals or quotations. No award will be made as a result of this notice. NIST is not responsible for any costs incurred by the respondents to this notice. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and appropriate. Thank you for taking the time to submit a response to this request!