Inactive

The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Government’s anticipated needs. BACKGROUND The N... The purpose of this sources sought notice is to conduct market research and identify potential sources of commercial products/services that satisfy the Government’s anticipated needs. BACKGROUND The National Institute of Standards and Technology (NIST), CHIPS Metrology R&D program has nondestructive defect detection metrology (NDDM) for the semiconductor advanced packaging project. The NDDM project aims at developing reference defect artifacts and characterizing defective semiconductor samples to help improve X-ray computed tomography (XCT) defect detection metrology and accuracy of detection. This is critical for improving the efficiency and productivity of the semiconductor failure analysis process. The XCT defect artifacts and defective semiconductor samples will be measured at statistically designed acquisition settings and reconstructed using different algorithms. An XCT reconstruction software is acquired to allow the generation of data sets reconstructed with different algorithms. The XCT reconstruction software allows for the reconstruction of data sets acquired with unconventional scanning trajectories and different reconstruction algorithms in addition to those available from the XCT acquisition system. NIST is seeking information from sources that may be capable of providing a solution that will achieve the objectives described above, in addition to the following essential requirements: Line Item 0001: XCT reconstruction software Description: Permanent license for XCT reconstruction software Quantity: One (1) license Technical Specifications Hardware system requirements The software shall be installed and operable on a Windows 11 system for both the graphical user interface (GUI) and application programming interfaces (APIs). (A stronger consideration will be given to the software if another operating system, such as Linux or Mac, is also supported.) The software shall support the use of NVIDIA RTX A6000 reconstruction processes Beam type The software shall be able to consider the following beam types: Cone beam Parallel beam Trajectories The software shall be able to consider the following scanning modes or trajectories: Circular (360º rotation) Helical Laminographic Translational Rotational Oblique/tilted Offset/extended field of view Region-of-interest tomography (i.e., local tomography) (A stronger consideration will be given to the software allowing the following trajectories): Short scan (180º + fan angle rotation) Half-beam Multi-helix Variable magnification or variable angular increment Multi-height data reconstruction High aspect ratio scans Preprocessing The software shall have a bad pixel correction routine available The software shall have a flat field correction routine available. The software shall allow importing flat field-corrected images. (A stronger consideration will be given to the software providing a phase retrieval algorithm) Geometry and drift correction The software shall be able to find and correct for the detector misalignment and tilt/rotation angles. The software shall be able to find and correct for the sample stage misalignment, tilt, and slant angles. The software shall be able to correct for linear drift from the sample or the X-ray source. The software shall be able to correct for stochastic non-linear drift (i.e., jitter). The software shall be able to correct for motion based on a phantom or marker. Image artifact correction The software shall have beam hardening correction modules that correct the following artifacts: Cupping. Streaks between highly absorbing materials (e.g., metals). Artifacts around highly absorbing materials (e.g., metals) due to photon starvation. The software shall have a module that corrects for X-ray scattering The software shall have a module that corrects for ring artifacts Reconstruction algorithms The software shall provide a filtered backprojection reconstruction algorithm (e.g., Feldkamp-Davis-Kress (FDK)) for the supported beam types and trajectories. (A stronger consideration will be given to the software providing options to change filter types and sizes.) The software shall provide an algebraic or statistical iterative reconstruction algorithm. (A stronger consideration will be given to the software that provides both algebraic iterative reconstruction techniques and statistical iterative reconstruction techniques.) User interface The software shall provide a GUI with documentation. (A stronger consideration will be given to the software with GUI that allows users to visually check and adjust parameters from quick reconstruction) The software shall provide an API with documentation and examples. (A stronger consideration will be given to the software with a Python API.) Data import and export The software shall allow importing radiographs in standard .tif/.tiff or .raw formats. The software shall allow importing radiographs from various sources (experiment and simulation) prepared in these formats. (A stronger consideration will be given to a software allowing direct import of XCT instrument native formats (e.g., .txrm/.xrm of Zeiss and .xtek of Nikon) for data and/or relevant metadata) The software shall allow exporting reconstructed data in standard .tif/.tiff or .raw formats. The software shall allow rescaling the reconstructed data intensity to 16 or 8-bit images based on the minimum and maximum attenuation values selected. License management The software shall provide a USB dongle for the license management. If the USB dongle option is not available, a node-locked license and mechanism shall be provided. The software shall allow operation through Windows Remote Desktop. HOW TO RESPOND TO THIS NOTICE In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response: Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice. Please note that to be considered for award under any official solicitation, the entity must be registered and “active” in SAM at the time of solicitation response. Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI). Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice. For each product recommended to meet the Government’s requirement, provide the following: Manufacturer name Model number Technical specifications If your company is not the manufacturer, provide information on your company’s status as an authorized reseller of the product(s) Describe performance capabilities of the product(s) your company recommends to meet the Government’s requirements. Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why. Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured. Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. For the NAICS code listed in this notice: Indicate whether your company is (a) a small business or (b) other than small business. See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement. Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance. Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services. Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services. Indicate if your company performs the facility renovation services or typically subcontracts the work to another company. Indicate if your company would be interested in inspecting the intended installation site during the market research phase. State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company’s published prices for equipment and services. If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. Identify any customers in the public or private sectors to which you provided the recommended or similar equipment. Include customer(s) information: company name, phone number, point of contact, email address. Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. QUESTIONS REGARDING THIS NOTICE Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received 5 days prior to the response date. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. IMPORTANT NOTES This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract. There is no solicitation available at this time. This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. After a review of the responses received, a synopsis and solicitation may be published on GSA’s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). Thank you for taking the time to submit a response to this request!