Inactive

***Amendment 2*** The purpose of this amendment is to: 1. Dissolve the small business set aside. The solicitation is now being conducted under full and open competition. 2. Post a revised SOR. 3. Exte... ***Amendment 2*** The purpose of this amendment is to: 1. Dissolve the small business set aside. The solicitation is now being conducted under full and open competition. 2. Post a revised SOR. 3. Extend the solicitation due date to 10:00 AM on 9/4/2024. All other requirements of the solicitation remain unchanged. ***End of Amendment 2*** ***Amendment 1*** The purpose of this amendment is to post responses to questions received in response to the solicitation. Vendor Questions and Government Responses: Below, you will find a list of questions submitted by vendors, along with the Government’s response: Q.1. Could you describe the process for which the furnace will be used? A.1. The furnace will be used to process ceramic oxide materials under controlled reducing conditions. Q.2. What is the required heated length? A.2. The heated length should be at least 200 mm. Q.3. Will the furnace need to support a protective atmosphere, such as Nitrogen or Argon? A.3. Yes, the furnace will be connected to mass flow controllers that supply combinations of N2/H2O/H2(forming gas) mixtures to provide controlled oxygen atmospheres during processing. Q.4. Will your material contain any organics or binders? If so, approximately how many grams will be present? A.4. No organics or binders will be processed in the furnace. ***End of Amendment 1*** THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) FAC 2024-05, effective May 22, 2024. The associated North American Industrial Classification System (NAICS) code for this procurement is 333994 - Industrial Process Furnace and Oven Manufacturing with a small business size standard of 500 Employees. This acquisition is being procured under full and open competition. Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until the time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer will confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.Gov registration is not active, the quotation will not be considered for award. The requirement is for one (1) High-Temperature Tube Furnace with a Gas Delivery System. The objective of this solicitation is to establish a Firm-Fixed-Price purchase order based on the specifications described in the attached Statement of Requirements (SOR). SPECIFIC REQUIREMENTS Responsible quoters shall provide a quotation for the following Contract Line Items (CLINs) in accordance with the specifications outlined in the attached Statement of Requirement. All equipment must be new. Used or remanufactured equipment will not be considered for award.: BASELINE ITEMS: Line Item 0001: (Quantity 1 Each) High Temperature Furnace Tube with a Gas Deliver System inclusive of delivery and a 1-year warranty, in accordance with the Statement of Requirements. DELIVERY TERMS Delivery terms shall be FOB Destination. The Contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. EVALUATION CRITERIA & BASIS FOR AWARD: The Government intends to award a purchase order resulting from this solicitation to the responsible contractor whose quotation, conforming to the solicitation, provides the lowest-priced, technically acceptable quote. Technically acceptable means that the quote: Meets or exceeds the minimum equipment specifications listed within the Statement of Requirements; Meets warranty requirements as applicable; and Meets the required delivery schedule. Price: The price evaluation will determine whether the quoted prices are fair and reasonable in relation to the solicitation requirements. Quoted prices must be entirely compatible with the technical quotation. INSTRUCTIONS: Completed Solicitation Provisions A completed version of all required solicitation provisions (see attached provisions/clauses document – required submissions highlighted in blue). Due Date for Quotations and Questions All quotations must be submitted via e-mail to Rudolph Spencer, Contract Specialist, at rudolph.spencer@nist.gov with a carbon copy to Donald Graham, Contracting Officer, at donald.graham@nist.gov. Submissions must be received no later than 10:00 a.m. Eastern Time on August 28, 2024. FAX quotations will not be accepted. Quoters must reference the RFQ number in the subject line of the e-mail submission. Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. Questions: All questions regarding this notice must be submitted via e-mail to rudolph.spencer@nist.gov with a carbon copy to Donald Graham, Contracting Officer, at donald.graham@nist.gov, no later than 1:00 p.m. Eastern Time on August 26, 2024. Quotation Preparation Instructions Each quotation shall consist of two (3) separate electronic files: (1) Technical Quotation (2) Pricing Quotation (3) Completed Provisions and Clauses document Technical Quotation: (1) Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature, or other product literature that CLEARLY DOCUMENTS that the offered products meet or exceed all specifications outlined in the statement of requirements. It is the responsibility of the quoter to ensure that the submitted documentation clearly addresses all specifications and requirements. (2) If product literature does not address any given specification, the Contractor must provide a discussion of how the Contractor will meet or exceed that required specification. Any modifications must be discussed. It is the responsibility of the quoter to ensure that the discussion clearly addresses the modification and how the required specification(s) will be met with the quoted modification. If such information is not provided, the Government will conclude that the minimum specifications have not been met. (3) The quoted delivery timeline for the deliverables. (4) A description of the quoted warranty. Price Quotation: (1) All Quoters shall submit a firm fixed price, FOB Destination, price quotation for the base line items. The quotation must include a unit price and the aggregate price for all line items. (2) The price quotation shall include a cover page with the following information: The solicitation number 1333ND24QNB640598; The name and address of the Quoter; The name, phone number, and email address of the Quoter’s point of contact; Government Unique Identifier number for Quoter’s active SAM.Gov registration. Any applicable discount terms. A statement that the Contractor agrees to all terms, conditions, and provisions included in the solicitation. If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state, “The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:” [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the Contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. A statement that the quotation is valid for a minimum of 60 days from the response deadline of this solicitation. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor’s FSS or GWAC contract. PROVISIONS AND CLAUSES: The provisions and clauses are applicable to this solicitation are identified in Attachment 2, titled “Applicable Clauses & Provisions.” The full text of a Federal Acquisition Regulation (FAR) provision or clause may be accessed electronically at www.acquisition.gov/far. The full text of a Department of Commerce Acquisition Regulation (CAR) provision or clause may be accessed electronically at http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. Statement of Requirements 2. Applicable Clauses & Provisions