Inactive

AMENDMENT IV to RFQ# 1333ND21QNB640416: The purpose of this Amendment is three-fold: To dissolve the SMALL BUSINESS SET-ASIDE and to resolicit this requirement as a FULL AND OPEN. To extend the quotat... AMENDMENT IV to RFQ# 1333ND21QNB640416: The purpose of this Amendment is three-fold: To dissolve the SMALL BUSINESS SET-ASIDE and to resolicit this requirement as a FULL AND OPEN. To extend the quotation due date to 1:00 PM Eastern Standard Time on April 6, 2022. To incorporate a revised "Applicable Clauses & Provisions" attachment dated 3/23/22. All other terms and conditions remain unchanged. END OF AMENDMENT IV. __________________________________________________________________________________ AMENDMENT III to RFQ# 1333ND21QNB640416: The purpose of this Amendment is to incorporate a revised Statement of Requirement (SOR) dated 1/20/22, which corrects a typo from the previous version as follows: Section 8 under "Specifications" is revised from reading: "8. Microscope shall include a set of eight objectives with various magnification and working distance specifications that fall within 25% of the following specifications:" to read as follows: "8. Microscope shall include a set of seven objectives with various magnification and working distance specifications that fall within 25% of the following specifications:" The SOR is hereby amended to incorporate the above revision. The minor change is highlighted in yellow in the attached revised SOR. This version supersedes all previous versions. Attachments • Statement of Requirement (Revised 1.20.22) The due date for quotes, along with all other terms and conditions remain unchanged. END OF AMENDMENT III. _____________________________________________________________________________________ AMENDMENT II to RFQ# 1333ND21QNB640416: The purpose of this Amendment is to incorporate changes to the Statement of Requirement (SOR), incorporate a revised version of the SOR, and extend the due date for quotations. The due date for quotations is hereby extended to 1:00 PM Eastern Standard Time on January 31, 2022. The SOR is hereby amended to incorporate revisions to the section titled “Specifications”. Changes are highlighted in red in the attached revised SOR. This version supersedes all previous versions. Attachments • Statement of Requirement (Revised 1.12.22) All other terms and conditions remain unchanged. END OF AMENDMENT II. __________________________________________________________________________________- AMENDMENT I to RFQ# 1333ND21QNB640416: The purpose of this Amendment is to provide responses to timely submitted clarification questions. Please see below: 1.) Question: In your statement of requirements, specification #8, it requires 8 objective lenses, as shown in the following image: Is item# C is a duplicate of item #B with a mistaken "WD24mm"? Is item# e is a duplicate of item #d with a mistaken "WD22mm"? Government’s Response: The above items are not duplicative and are not mistakes. WD is “working distance” and the specifications identify the Governments need for objectives with a range of working distances. 2. Question: For the shipping, your statement is requiring a shipping term FOB, which is " free on board". Do you have a specific international carrier for handling your package and shipping? Do you want to take responsibility for the cargo shipment and its risk during the shipment? If not, we would recommend our standard CIP terms, which covers the international shipping, and its related insurance. Government’s Response: The intent of the “FOB Destination” requirement is that responsibility for the item(s) does not transfer to the Government until the item is delivered to our campus and the address/location identified in the requirements. Please review Federal Acquisition Regulation (FAR) clause 52.247-34- F.O.B. Destination for complete language of the clause. https://www.acquisition.gov/far/52.247-34 END OF AMENDMENT 1. DESCRIPTION THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR PARTS 12 AND 13. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) FAC 2021-06 effective July 12, 2021. The associated North American Industrial Classification System (NAICS) code for this procurement is 333314 - Optical Instrument and Lens Manufacturing with a small business size standard of 500 Employees. This acquisition is being procured as a full and open. Quoters must possess an ACTIVE registration in the System for Award Management system, www.SAM.gov, when submitting a quotation and shall continue to be registered until time of award, during performance, and through final payment of any contract resulting from this solicitation. The Contracting Officer will confirm that quoters have an “active” registration at the www.sam.gov website upon receipt of the quotation. If the SAM.Gov registration is not active, the quotation will not be considered for award. The National Institute of Standards and Technology (NIST) requires a transmission digital holographic microscope (DHM) to make measurements of cell morphology and viability, which are quality attributes of cell-based therapeutics. This project is part of the NIST program in regenerative medicine and advanced therapies. The objective of this solicitation is to establish a Firm-Fixed-Price purchase order based on the specifications described in the attached Statement of Requirements (SOR). SPECIFIC REQUIREMENTS Responsible quoters shall provide a quotation for the following Contract Line Items (CLINs), in accordance with the specifications outlined in the attached Statement of Requirement. All equipment must be new. Used or remanufactured equipment will not be considered for award: BASE LINE ITEMS: Line Item 0001: (Quantity 1 Each) Digital Holographic Microscope (DHM), in accordance with the Statement of Requirements. Line Item 0002: (Quantity 1 Each) Training, in accordance with the Statement of Requirements. Line Item 0003: (Quantity 12 Months) Warranty, in accordance with the Statement of Requirements. EVALUATION CRITERIA & BASIS FOR AWARD: The Government intends to award a purchase order resulting from this solicitation to the responsible Contractor whose quotation, conforming to the solicitation, provides the lowest priced, technically acceptable quote. Technically acceptable means that the quote: Meets or exceeds the minimum equipment specifications listed within the Statement of Requirements; Meets training, warranty, and installation requirements as applicable; and Meets the required delivery schedule. Price: The price evaluation will determine whether the quoted prices are fair and reasonable in relation to the solicitation requirements. Quoted prices must be entirely compatible with the technical quotation. INSTRUCTIONS: Completed Solicitation Provisions A completed version of all required solicitation provisions (see attached provisions/clauses document – required submissions highlighted in blue). Due Date for Quotations and Questions All quotations must be submitted, via e-mail, to Sadaf Afkhami, Contract Specialist, at Sadaf.Afkhami@nist.gov. Submissions must be received no later than 1:00 p.m. Eastern Time on August 20, 2021. FAX quotations will not be accepted. Quoters must reference the RFQ number in the subject line of the e-mail submission. Quotes shall not be deemed received by the Government until the quotation has entered the e-mail inbox of the individual(s) set forth above. Questions: All questions regarding this notice must be submitted via e-mail to Sadaf Afkhami, at Sadaf.Afkhami@nist.gov, no later than 1:00 p.m. Eastern Time on August 10, 2021. Quotation Preparation Instructions Each quotation shall consist of two (2) separate electronic files: (1) Technical Quotation and (2) Pricing Quotation. Technical Quotation: (1) Technical description and/or product literature. Quoters shall include the manufacturer, make and model of the product, manufacturer sales literature or other product literature which CLEARLY DOCUMENTS that the offered products meet or exceed all specifications outlined in the statement of requirements. It is the responsibility of the quoter to ensure that submitted documentation clearly addresses all specifications and requirements. (2) If product literature does not address any given specification, a discussion of how the Contractor will meet or exceed that required specification. Any quoted modification must be discussed. It is the responsibility of the quoter to ensure that the discussion clearly addresses the modification and how the required specification(s) will be met with the quoted modification. (3) The quoted delivery timeline for the base line item. (4) A description of the quoted training. (5) A description of the quoted warranty. Price Quotation: (1) All Quoters shall submit a firm fixed price, FOB Destination, price quotation for the base and option line items. The quotation must include a unit price and total amount for each line item and the aggregate price for all base and option line items. (2) The price quotation shall include a cover page with the following information: The solicitation number 1333ND21QNB640416; The name and address, of the Quoter; The name, phone number, and email address of the Quoter’s point of contact; DUNS # for Quoter’s active SAM.Gov registration. Any applicable discount terms. A statement that the Contractor agrees to all terms, conditions, and provisions included in the solicitation. If the Contractor objects to any of the terms and conditions contained in this solicitation, the Contractor shall state “The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:” [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the Contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. A statement that the quotation is valid for a minimum of 60 days from the response deadline of this solicitation. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor’s FSS or GWAC contract. PROVISIONS AND CLAUSES: The provisions and clauses applicable to this solicitation are identified in Attachment 2 titled “Applicable Clauses & Provisions”. The full text of a Federal Acquisition Regulation (FAR) provision or clause may be accessed electronically at www.acquisition.gov/far. The full text of a Department of Commerce Acquisition Regulation (CAR) provision or clause may be accessed electronically at or http://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. Statement of Requirements 2. Applicable Clauses & Provisions