Inactive Total Small Business Set-Aside (FAR 19.5)

04/04/2023 AMENDMENT TO ADD UPDATED STATEMENT OF WORK (REVISIONS MADE TO SECTION 3.1.4.3 AND 3.1.4.4 (SEE ATTACHMENTS FOR REVISED SF18) 3.1.4.3 Roof, Gutter, and Downspout Removal. The contractor shal... 04/04/2023 AMENDMENT TO ADD UPDATED STATEMENT OF WORK (REVISIONS MADE TO SECTION 3.1.4.3 AND 3.1.4.4 (SEE ATTACHMENTS FOR REVISED SF18) 3.1.4.3 Roof, Gutter, and Downspout Removal. The contractor shall outline the process to remove, dispose of, and recycle (if applicable) the existing roofs, gutters, and downspouts. 3.1.4.4 Roofing. The new roof shall be made of metal with a minimum 26 gauge or better grade and have a standing seam pattern. It must be designed for use in a corrosive marine coastal environment. NuRay Series 6000 standing seam steel roofing system 26 gauge Kynar paint finish or equivalent. The paint color shall be selected to match or come as close as possible to the nearby existing roof. The new roof must come with a minimum 20 years warranty on materials and 10 years on installation workmanship. The finished roof must meet or exceed the design minimum wind speed requirement of 90 miles per hour. Extra care on the installation must be taken along the hip and gable edges to properly secure the roof to sustain the designed high wind. All installations including underlayment and moisture barriers must be performed as per the manufacturer’s specifications. 03/31/2023 AMENDMENT TO ADD UPDATED STATEMENT OF WORK (REVISIONS MADE TO SECTION 3.0 THROUGH 3.1.6), SEE ATTACHMENTS FOR REVISED SF18. AMENDMENT TO POST THIS QUESTION AND ANSWER: Q: I do not see a specified gauge of metal to use. Also it says to use materials made to use in a marine environment. The only option for this is aluminum. Please confirm that you would like to use aluminum. The spec says to use “In kind” material but the site visit mentioned everything will switch to the standing seam roofing. Please advise. A:The existing metal roofs have a wide corrugated pattern. We want the new roofs to be standing seam metal with a minimum 24-gage grade. For the gutter and downspouts, aluminum is acceptable but must have a minimum thickness of 0.027 inch. The Statement of Work paragraphs 3.1.2; 3.1.3; 3.1.4, 3; 3.1.4.5 have been revised to clarify our requirements. This is a solicitation request for quote supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; quotes are being requested and no other written solicitation will be issued. This solicitation is being issued as a total small business set-aside. The associated NAICS code is 238160. The small business size standard is $19.0M. Description of requirements is as follows: Roof replacement Please refer to the attached Statement of Work for full technical specifications/requirements See attached full Solicitation with all terms and conditions which all vendors must be in compliance with to be eligible for award. Vendors must provide their Will or Will Not and Does or Does Not Statement per FAR Provision 52.204-24 which goes with FAR Clause 52.204-25. At a minimum, all quotes should include contact information and CAGE Code.