Inactive Total Small Business Set-Aside (FAR 19.5)

The purpose of Amendment 0001 is to: 1. Amend block 8. to add Address Offer To: Tim Andersh, timothy.andersh@usda.gov. 2. Incorporate Atch 8 Questions and Answers 1240LT23R0057 20230804 into the solic... The purpose of Amendment 0001 is to: 1. Amend block 8. to add Address Offer To: Tim Andersh, timothy.andersh@usda.gov. 2. Incorporate Atch 8 Questions and Answers 1240LT23R0057 20230804 into the solicitation. 3. Incorporate Atch 9 - Sign-In Preproposal Site Visit 1240LT23R0057 4. Amend Section L.1, 452.215-71 Instructions for the Preparation of Technical And Business Proposals to add (a) (5) Offer submission instructions: Offers shall be emailed to timothy.andersh@usda.gov. It is the contractor's responsibility to ensure the email, with applicable documents, due to document size, is delivered and received by the due date/time. Large files may have to be separated into multiple emails. Solicitation Documents: All future information about this acquisition, including amendments, will be distributed solely through this site. The complete solicitation package will be attached and made available only through SAM.gov, https://sam.gov. Interested parties are responsible for monitoring this site to ensure that they have the most up-to-date information about this acquisition to include amendments. Anyone wishing to participate in this proposed procurement must obtain a copy from SAM.gov. Ensure your company is registered for the NAICS Code 237990 for this requirement. Contractors are required to be actively registered with the System for Award Management (SAM) https://www.sam.gov prior to submitting a proposal and to be considered for award. Registering in the SAM system is FREE. If you need assistance, please be sure to reach out your local Procurement Technical Assistance Center (PTAC) representative. PTAC is a FREE resource to all small business and your state representative’s contact information can be found at the following website: https://www.aptac-us.org/.

Inactive Total Small Business Set-Aside (FAR 19.5)

Description of Work Proposals will be solicited by the USDA, Forest Service for the Willett Creek Road and Channel Improvement Project for the Bighorn National Forest. The project would restore and en... Description of Work Proposals will be solicited by the USDA, Forest Service for the Willett Creek Road and Channel Improvement Project for the Bighorn National Forest. The project would restore and enhance approximately 0.7 miles of stream and aquatic habitat, restore and enhance approximately 14.9 acres of riparian habitat, and improve approximately 0.75 miles of road 226 - Woodchuck. Optional Items include road maintenance to NFSR 226 and 277 to allow for access for construction equipment and materials. Construction includes, but is not limited to, the work shown on the plans, stated in the specifications, and summarized below: • Install traffic control signs and close work areas • Install erosion control measures • Construct new roads • Install the stream-flow diversion systems • Clear trees with root wad intact for road construction and stockpile for later use during stream channel and floodplain restoration • Remove sedge during excavation and stockpile for later use during stream channel and floodplain restoration • Excavate for the structures • Place foundation fills and foundations • Place precast footings • Place culverts • Restore streambanks and streambed in new and existing crossings • Backfill the structures • Remove stream-flow diversion system and return flow to the channel • Place aggregate on road surface • Decommission existing roads and stream restoration • Final cleanup and site work Project Location: The Willet Creek Road and Channel Improvement Project site is located approximately 38 miles east of Greybull, Wyoming, on National Forest System Road 226, Bighorn National Forest. The road is single lane, native surface maintained for 4 wheel drive traffic only. Place of Contract Performance: Bighorn County, Greybull, WY Contract Time/Period of Performance: The anticipated start date potentially Fall 2023, weather permitting. Work to be completed by October 30, 2024. Magnitude of the Proposed Project: In accordance with FAR 36.204, the estimated magnitude of construction for this project is between $500,000 and $1,000,000. Solicitation Date: The solicitation is anticipated to be issued on or after June 26, 2023. Solicitation Documents: All future information about this acquisition, including amendments, will be distributed solely through this site. The complete solicitation package will be attached and made available only through SAM.gov, https://sam.gov/content/home on or after 15 days of this notice. Interested parties are responsible for monitoring this site to ensure that they have the most up-to-date information about this acquisition to include amendments. Anyone wishing to participate in this proposed procurement must obtain a copy from SAM.gov. Solicitation/Award Type: This requirement is being solicited as a Small Business set-aside, with the intent to award a Firm-Fixed Price contract. A single award will be made from the solicitation. Ensure your company is registered for the NAICS Code 237990 for this requirement. Contractors are required to be actively registered with the System for Award Management (SAM) https://www.sam.gov prior to submitting a proposal and to be considered for award. Registering in the SAM system is FREE. If you need assistance, please be sure to reach out your local Procurement Technical Assistance Center (PTAC) representative. PTAC is a FREE resource to all small business and your state representative’s contact information can be found at the following website: https://www.aptac-us.org/. Point of Contact: Tim Andersh, Contracting Officer, (605) 389-3485, timothy.andersh@usda.gov