Inactive

Performance of Work Statement (PWS) The proposed work to be on site at the Genetics and Sustainable Agriculture Unit. The maintenance for Ion GeneStudio S5 must include at minimum: 1) confirmation of ... Performance of Work Statement (PWS) The proposed work to be on site at the Genetics and Sustainable Agriculture Unit. The maintenance for Ion GeneStudio S5 must include at minimum: 1) confirmation of serial number and contract status; 2) Back up data 3) Review system concerns 4) Confirm status of sequencer updated software ECOs/updates; 5) Check software version of sequencer and torrent server; 6) Check all luers and repair; 7) Clean touch screen and verify calibration; 8) Clean fan screen; 9) Replace squid port seals; 10) Clean pogo pins using alcohol; 11) Inspect all fittings in the liquid manifold, cartridge clamp, w2, and w3 for signs of leaks; 12) Inspect the area around the waste port inside the chip housing; 13) Remove the waste container and clean up any signs of spills; 14) Run all factory tests to verify electronics: self test, heaters, valvetest, rfid, analysis test; 15) Check flow rates for waste lines: chip waste, main waste; 16) Pulse clean the sequencer; 17) No data on disks and rebuild disks; 18) Provide training on the instrument using currently accepted protocols and panels The maintenance for Ion GeneStudio S5 must include: 1) confirmation of serial number and contract status; 2) Back up data 3) Review system concerns 4) Confirm status of sequencer updated software ECOs/updates; 5) Visually assess the location of the instrument; 6) Ensure lab bench and clearance requirements; 7) Check software version of torrent suite software; 8) Check the latest ion torrent server release notes and verify software matches; 9) Follow instructions to fill the coolant in the liquid cooling assembly; 10) Replace the reagent tray assembly gaskets and filters; 11) Run factory tests and record results for: sensors, xyz robot, zpump, breaking centrifuge 1, breaking centrifuge 2, loading centrifuge, camera, enrichment, pcr plate, chiller, usb, and network; 12) Perform temperature verification test on the thermal cycler; 13) Clean the centrifuge bowls and rotors with 70% ethanol; 14) Run the xyO calibration; 15) Run z calibration; 16) Run gravimetric test; 17) Provide training on the instrument using currently accepted protocols and panels