Inactive Total Small Business Set-Aside (FAR 19.5)

USDA APHIS WS Feral Swine Program is requesting the following: (12) M.I.N.E. GATE WITH CONTROL BOX (12) 12 RIGID PANELS w/13 CONNECTING RODS (12) 4G VZW M.I.N.E. CAMERA ASSEMBLY (4) M.I.N.E. TRAP TRAI... USDA APHIS WS Feral Swine Program is requesting the following: (12) M.I.N.E. GATE WITH CONTROL BOX (12) 12 RIGID PANELS w/13 CONNECTING RODS (12) 4G VZW M.I.N.E. CAMERA ASSEMBLY (4) M.I.N.E. TRAP TRAILER 10' bed with 3500 lbs. axle Trap Dimensions and specifications: The trailer trap is required to have little set up time, this gives the employee more time and makes it easier to move the trap to other trapping sites. The panels and gates are to be built to fit on the trailer and safely moved by either UTV, ATV or vehicle through rough terrain. Trailer must couple to a 2” trailer ball. It is imperative that the trapping system needs to be light weight enough to be assembled by one employee. Traps must have a minimum diameter of 20 feet and minimum circumference of 67 feet in order to fit in large or small trap locations. Panels and gates must be 81.5” wide and 66” high. This size allows the trap to be light enough for single employees to set up while being large enough so that feral swine is not able to escape. The design of the trailer traps allows configuration set up to drop one gate or up to four trap gates if required. The gates must be constructed so they can be disassembled into two parts for easier movement and storage. The trap system is required to use secure pins that allow each panel to attach without the use of posts, wire or bolts. To ensure the trap will provide a variety of entrapment configurations, the trap is required to have two 81.5”x 66” wide trap doors that can be used side by side to allow for a larger opening for feral swine to enter or utilizing the two doors in which they can be placed on opposite ends of the corral to allow flexibility on trap door placement increases the odds on successful feral swine catches. TRAILER TRAP SPECIFICATIONS: • 8 steel wire panels 81 ½ inches wide, 66 inches high, 1 inch 14 ga steel tubing, wire opening 2x4 inches, galvanized wire, pin size 5/8, pins sleeve size is 7/8 • 2 Trap gates are 81 ½ inches wide, 66 inches high, 1 ¼ 11 ga steel tubing, galvanized wire opening 2x4 inches, pin size 5/8 pin sleeve size 7/8, total gate opening 50 x 78 1/2 , gate slides 1 inch steel rod with 1 7/8 steel rings, remote latch attached in the center of the gate. • Trailer total width is 66 inches, total length is 130 inches, total height is 79 inches, 11 ga steel frames with 9-inch fenders, tire size 15 ST205/75R15, trap bracket 2x4 steel, 2 inch ball size trailer hitch. • Trap diameter with gates minimum 20 ft. • Compatible with camera systems • Compact trap, panels and gates hang on bracket, trailer has toolbox for pins. • Can be hauled by UTV, ATV or truck CAMERA AND APPLICATION (iOS and Android) The live video feed capabilities enable employees to view the trap area in real time. This system can also be directly wired to any remote detonated trap gate which allows the trap gate to drop without using a second sim card and wireless carrier. The camera system is required to have a solar panel allows for self-charging of the battery. The trap company must have technical support via chat box on app, phone and email. These camera systems and traps must be compatible with a South CO. rotary latch as the trigger mechanism, to be paired with existing traps USDA WS SC has in inventory. USDA WS SC uses south co rotary automatic door latches as the primary trigger mechanism to drop multiple types of trap doors i.e., homemade, drop traps and aftermarket traps. The 12 live feed camera systems we are requesting will be used in conjunction with other traps in our fleet, due to the ease of moving a camera system to an existing trap or using one camera system for multiple trap sites. USDA APHIS South Carolina WS is requesting to purchase of 12 camera systems paired with 12 trailer traps. Camera Specifications shall have: • Camera minimum of a 4-year limited warranty • Video resolution of 2300 X 1700 • Adjustable infrared 850mm light capable of viewing distance up to 120 ft. • 125-degree minimum camera field of view, to allow the full view of any size trap at a close distance. • Camera light Lux rating of .05 or better, to allow for low light and night viewing. • Camera must be adjustable by angle and direction to all customized mounting. • Camera must include min length of 30 ft. gate cable capable of operating a South Co R4EM 53-173 6-pin rotary latch, allowing operation and integration of multiple traps i.e., Boar Buster, Missouri Drop traps, Big Pig, Bull Creek, Tusk Innovation, 377 Traps, and custom traps and or trap gates. • Camera must be accessible 24x7 and not use passive mode, which delays the live stream and notification reliability. • iOS and Android applications available for download to any smartphone • Web interface for streaming/trapping via PC or laptop • Camera must have the ability to set user defined motion area, time between motion alerts, and size of triggering objects. • Camera must automatically record motion events store and hold for download a min of two weeks. • Motion images and videos must be easily filtered by camera name for ease of use • Administration of accounts and access are customizable to organize units by districts and projects. • Weatherproof box to keep camera and components from outdoor elements. • Camera and application have the ability for multiple users to have different functional control of the camera and trap systems. Tiered logins to allow full use of viewing only of all or specific cameras within an organization. • Integrated chat feature on the application for technical support and general questions. • Camera must have the ability to operate gates from a single latch or multiple electronics latches. • Camera, solar components, and antenna capable of mounting to a single T post. COMMUNICATION COMPONENTS • External high gain antenna with a minimum of an 8db gain • Industrial rated 4G cellular components designed for long term outdoor use. POWER COMPONENTS • Provides 24x7 Power using a minimum 120w solar panel and charge controller. • Flexible solar panel to prevent breakage and provide easier portability, with T Post mounts. • Built-In surge protection/Reverse polarity protection/Lightening protection. • Charge controller with Bluetooth capability to monitor battery condition and solar output. • Camera and Gate operations powered by single power source. LITHIUM IRON PHOSPHATE BATTERIES • 150-amp hour Lithium Iron Phosphate (LiFePo4) 12v battery • 4-year battery warranty • Minimum 3000 cycle battery life • 30%-amp hour recharge capacity rating • Max 42lbs. Items will be delivered to USDA office located at: Point of Contact: James O. Edens "Jim" Supervisory Wildlife Biologist USDA-Wildlife Services 400 Northeast Drive, Suite L Columbia, SC 29203 Office: 803-477-3156 Cell: 803-457-5665 james.o.edens@usda.gov Fax: 803-786-9472 All quotes and question will be emailed to below: Todd K. Bierl Contracting Officer USDA APHIS Animal and Plant Inspection Service 250 Marquette Ave., Suite 410 Minneapolis, Minnesota 55401 Office#(612)336-3465 Cell# (612)500-1321 Email: Todd.K.Bierl@usda.gov