Inactive

Backhoe Loader Salient Characteristics Engine Manufacturer and Model John Deere PowerTech EWL 4045HL050 turbocharged Non-Road Emission Standard---- EPA Final Tier 4/EU Stage IV Displacement----- 4.5 L... Backhoe Loader Salient Characteristics Engine Manufacturer and Model John Deere PowerTech EWL 4045HL050 turbocharged Non-Road Emission Standard---- EPA Final Tier 4/EU Stage IV Displacement----- 4.5 L (276 cu. in.) Gross Peak Power---- 88 kW (118 hp) at 1,900 rpm Net Peak Power (ISO 9249) ----- 87 kW (116 hp) at 1,900 rpm Net Peak Torque (ISO 9249) ----- 459 Nm (339 lb.-ft.) at 1,600 rpm Net Torque Rise----- 26% Lubrication----- Pressure system with spin-on filter and cooler Air Cleaner---- Dual-stage dry type with safety element and evacuator valve Cooling Fan Type---- Electronically controlled, variable rate, suction-type cooling fan standard Engine Coolant Rating----- 40 deg. C ( 40 deg. F) Engine Oil Cooler----- Oil to water Powertrain Transmission------ 5-speed, helical-cut gears, full PowerShift transmission with hydraulic reverser standard; electric clutch cutoff on loader lever; standard AutoShift Torque Converter----- Single stage, dual phase with 2.63:1 stall ratio, 280 mm (11 in.) Maximum Travel Speeds with Standard Engine, Measured with 21L-24 Rear Tires Forward Reverse Gear 1 5.6 km/h (3.5 mph) 7.0 km/h (4.3 mph) Gear 2 10.2 km/h (6.3 mph) 12.9 km/h (8.0 mph) Gear 3 21.1 km/h (13.1 mph) 20.8 km/h (12.9 mph) Gear 4 38.4 km/h (23.9 mph) Gear 5 40.0 km/h (24.9 mph) Axles Axle Oscillation, Stop to Stop, Front Axle---- 22 deg. Axle Ratings Front Rear SAE J43 6500 kg (14,300 lb.) 7500 kg (16,500 lb.) Dynamic 9000 kg (19,800 lb.) 10 000 kg (22,000 lb.) Static 26 500 kg (58,400 lb.) 26 500 kg (58,400 lb.) Ultimate 43 500 kg (95,900 lb.) 43 500 kg (95,900 lb.) Differentials Mechanical-Front-Wheel-Drive (MFWD) Axle -------Automatic, limited-slip traction control Rear Axle---------- Foot actuated, hydraulically engaged 100% mechanical lock Steering ----------(ISO 5010) Hydrostatic power steering and emergency steering Axle MFWD Non-Powered Front Curb-Turning Radius With Brakes -----------------3.53 m (11 ft. 7 in.) 3.45 m (11 ft. 4 in.) Without Brakes------------- 4.02 m (13 ft. 2 in.) 3.90 m (12 ft. 10 in.) Bucket-Clearance Circle With Brakes --------------10.20 m (33 ft. 6 in.) 10.13 m (33 ft. 3 in.) Without Brakes -----------10.93 m (35 ft. 10 in.) 10.80 m (35 ft. 5 in.) Steering Wheel Turns (lock to lock, flow amplified) ----2.6 to 3.6 3.1 to 4.3 MFWD Axle -----Heavy duty, outboard planetary final drives distribute shock loads over 3 gears Rear Axle Heavy duty, outboard planetary final drives distribute shock loads over 4 gears Brakes (ISO 3450) Service------- Power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing Parking------- Spring applied, hydraulically released, wet, multi-disc, independent of service brakes with electric switch control Hydraulics Main Pump -------Pressure compensated load sensing (PCLS), axial-piston pump Pump Flow at 2,200 rpm, Backhoe and Loader --------159 L/m (42 gpm) System Relief Pressure Backhoe ------ 24 993 kPa (3,625 psi) Lift Mode------ 27 579 kPa (4,000 psi) Loader --------- 24 993 kPa (3,625 psi) Controls Backhoe----- 2-lever mechanical standard; pilot controls with pattern select and auxiliary functions optional; field kits available for additional mechanical-control options Loader------ Single-lever control with electric clutch cutoff switch and MFWD (momentary) standard; single-lever control with electric clutch cutoff switch, electrohydraulic (EH) proportional auxiliary roller, MFWD (momentary), and transmission quick-shift optional Electrical Voltage----- 12 volt Alternator Rating------- 145 amp Lights----- 10 halogen: 4 front, 4 rear, and 2 side docking (32,500 candlepower each); turn signals and flashers: 2 front and 2 rear; stop and taillights; and 2 rear reflectors; factory-installed option for 2 LED spotlights and 8 LED floodlights in lieu of standard halogen light package Operator Station Type (ISO 3471)------ Fully enclosed cab, isolation mounted, ROPS/FOPS, left/right access. Mechanical Front Wheel Drive (MFWD) with Limited Slip Differential Autoshift Transmission. Pilot Controls, Two Lever, with Pattern Selection Less Coupler - Less Thumb Less Backhoe Bucket with Bucket Pins 1 6020 Extendible Dipperstick 1 6230 Auxiliary Hydraulic with One & Two Way Flow (Hammer & Thumb/Swinger) Two-Function Loader Hydraulics,Single Lever 1.3 Cu. Yd. (1.0 Cu. M.) 92 in. (2.34 m) Wide Heavy Duty Long Lip Bucket with Bolt on Cutting Edge and Skid Plates 1250 Lb. (567 kg) Front Counterweight Dual Maintenance Free Batteries With Disconnect and Jump Post Front View Mirror Engine Coolant Heater Auto Ride Control LED Light Package Heavy-Duty Grille Frame Left Side Console Storage with Cup Holders Full MFWD Driveshaft Guard Strobe Light with Magnetic Mount Radio, Bosch Premium Package Exterior Rear View Mirrors (2) Heavy-Duty Stabilizer Pads Seat, Cloth Air-Suspension License Plate Bracket and Light Slow Moving Vehicle Emblem 6 inch Amber Warning Light with LED Beacon and Magnetic Roof Mounting Kit Boom Light Kit Rubber Bumper for Grille Frame 48 Clean up bucket 30 Dig Bucket 1 Trench Bucket Hydraulic Thumb Complete Wain-Roy Swinger Coupler

Inactive

Please see attached solicitation: The Department of Veteran Affairs is soliciting for the following Equipment: John Deere 410L Backhoe Brand Name or Equal to award a Firm-Fixed Contract resulting from... Please see attached solicitation: The Department of Veteran Affairs is soliciting for the following Equipment: John Deere 410L Backhoe Brand Name or Equal to award a Firm-Fixed Contract resulting from the solicitation to the responsive offeror whose offer conforms to the solicitation and will be most advantageous to the government in terms of price and other considered factors. The solicitation will be set aside for Small Disabled Veteran Owned Businesses. Solicitation 36C24122Q0792 will be available for download on or around July 19,2022. The close date will be on July 26, 2022, at 4 PM EST time. Copies of the solicitation will not be available for mailing. All prospective offerors must be registered in the System for Award Management (SAM) prior to award of the contract. Registration may be accomplished at www.sam.gov. Questions concerning this procurement may be directed to the contracting officer Ralf Pietzsch at ralf.pietzsch@va.gov by 12 pm EST July 21, 2022. Questions submitted after may not be answered. The applicable NAICS code is 333120.