Inactive

SEE SOURCES SOUGHT ATTACHMENT This is a Sources Sought Notice Only for the Bureau of Engraving and Printing (BEP) a component of the Department of the Treasury that designs, engraves, and prints U.S. ... SEE SOURCES SOUGHT ATTACHMENT This is a Sources Sought Notice Only for the Bureau of Engraving and Printing (BEP) a component of the Department of the Treasury that designs, engraves, and prints U.S. banknote currency and other U.S. security products. This IS NOT a solicitation for proposals, proposal abstracts, requests for bids or quotations, nor a promise to issue a solicitation in the future. The purpose of this Request for Information is to obtain knowledge and information for project planning purposes only. NAICS: 332994 Small Arms, Ordnance, and Ordnance Accessories Manufacturing Product Service Code: 1005 - Guns, Through 30MM This is a BRAND NAME requirement is for all labor, travel, parts, materials, transportation, equipment, tools, supplies and training services as applicable to deliver the requested weapon systems. The Full-Size Glock 47 COA Pistol with electronic pistol mounted optics and the Mid-size Glock 45 COA Pistol with electronic pistol mounted optics. (General Specifications) The Pistols shall have the following characteristics and components should be included: Caliber: 9x19mm NATO. Action: Striker-Fired, consistent trigger pull every shot. Barrel Length Full Size: Minimum 4.4 inches, maximum 4.5 inches. Barrel Length Mid-Size: Minimum 4 inches, maximum 4.1 inches. Overall Length Full Size: Minimum 7.9 inches, maximum 8.1 inches. Overall Length Mid-Size: Minimum 7.3 inches, maximum 7.5 inches. Height W/O optic Mid and Full Size: Minimum 5.4 inches, maximum 5.5 inches. Width: Maximum 1.34 inches. Magazine Capacity: Minimum 17 rounds standard; must accept extended magazines without modification. Must be Polymer coated magazines. Frame Size: Full-size frame compatible with compact-length slide assemblies for modularity in training or operational use. Weight: Maximum 25 oz (unloaded, without magazine). Optic Mounting Requirements Factory-milled slide designed to accept electronic pistol optics: Optic Interface: Must be integrated into the slide from the manufacturer, not an aftermarket cut. Must not require or utilize an “adapter plate system”. Optic Mounting System: Shall use a closed-emitter-specific footprint with a dove tail style forward recoil lug to prevent shearing under duty use and a steel rear sight utilized to secure the optic in place. All mounting screws, windage and elevation adjustments and battery access must utilize the same T10 Torix Bit. Must be capable of directly accepting a closed-emitter duty optic without adapter plates. Optic must have an advertised battery life of approximately five (5) years on a single. Side loaded CR2032 battery. Interchangeability and Modularity Must be able to interchange slide assemblies with compact-size models from the same family of firearms without gunsmithing. Must not utilize a removable fire-control group. Safety & Reliability Must pass NATO or equivalent military/LE qualification standards for drop safety, sustained firing, and adverse conditions (mud, sand, water, extreme cold/heat). Must be commonly acceptable for use at all Law Enforcement ranges and training venues. Must have a minimum service life of 20,000 rounds without critical component failure. Must utilize an integrated “blade style” trigger safety and no other manual/external safety levers (i.e. thumb or grip style safeties).