Inactive Total Small Business Set-Aside (FAR 19.5)

ITEM 1: Deck Covering (Carpeting) Renew 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to renew carpeting deck covering. 1.2 Government-furnished property. None. 2. ... ITEM 1: Deck Covering (Carpeting) Renew 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to renew carpeting deck covering. 1.2 Government-furnished property. None. 2. APPLICABLE DOCUMENTS Coast Guard Drawings Coast Guard Drawing 420 WAGB 801-001, Rev J, Booklet of General Drawings Coast Guard Publications Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), Jan 2014, Install New Deck Covering Systems Other References Federal Specification (Fed Spec) DDD-C-95, Mar 1972, Carpets and Rugs, Wool, Nylon, Acrylic, Modacrylic MIL-STD-1623, Dec 1981, Fire Performance Requirements and Approved Specifications for Interior Finish Materials and Furnishings 3. REQUIREMENTS 3.1 General. 3.1.1 CIR. None. 3.1.2 Technical Representative. Not applicable. 3.1.3 Protective measures. The Contractor shall furnish and install suitable covering to seal off and protect all non-affected surfaces/equipment and spaces in the vicinity of the work area against contamination during the performance of work. Upon completion of work, remove protective material and inspect for the presence of contamination. Clean all equipment and spaces, contaminated due to improper protection, to original condition of cleanliness. 3.1.4 Interferences. The Contractor shall handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences). 3.2 Deck covering installation particulars. The Contractor shall perform all tasks specified in SFLC Std Spec 6341, Appendix E (Carpeting), and herein, to install a new deck covering system in the location(s) specified in Table I below, shown on Coast Guard Drawing 420 WAGB 801-001. (P00008) Table 1 – DECKING SYSTEM PARTICULARS LOCATION Room number APPROX TOTAL AREA (sqFT) DECK MTL COVE BASE UNDERLAYMENT REQUIREMENT 01-21-1-L 101 260 Steel Y Per para 3.3 01-21-2-L 102 260 Steel Y Per para 3.3 01-21-5-L 103 300 Steel Y Per para 3.3 01-21-6-L 104 300 Steel Y Per para 3.3 01-33-3-L 105 300 Steel Y Per para 3.3 01-33-4-L 106 300 Steel Y Per para 3.3 01-50-1-L 107 225 Steel Y Per para 3.3 01-50-2-L 108 225 Steel Y Per para 3.3 01-56-3-L 109 270 Steel Y Per para 3.3 01-56-6-L 110 270 Steel Y Per para 3.3 01-33-1-L 1st Class Lounge 260 Steel Y Per para 3.3 01-42-0-L Crew Lounge 416 Steel Y Per para 3.3 01-33-0-L Crew Library 260 Steel Y Per para 3.3 *Approximated. **Note: A = Aluminum; S = Steel. 3.3 Visual inspection. Upon removal of the existing carpet the Contractor shall perform a visual inspection of the underlayment and determine if repairs or replacement are needed. Submit a CFR. 3.4 Carpeting requirements. The Contractor shall procure carpeting of the following construction type, for installation: "Multilevel Loop Pile - Woven Through Back (44 Oz. Per Sq. Yd. Pile)". 3.5 Deck covering color. The Contractor shall use deck covering color Azure Blue (MC220). 3.6 Touch-up preservation. The Contractor shall prepare and coat all new and disturbed exterior and interior surfaces to match existing adjacent surfaces, in accordance with SFLC Std Spec 6310. Abide by all touch-up requirements outlined in SFLC Std Spec 6310, 3.1.13. 4. NOTES This section is not applicable to this work item.