Inactive

Description of Requirement: Request to obtain a Purchase Order to procure Screws and plates that are specifically designed to be used on patients that undergo Craniotomy surgery where their skull has ... Description of Requirement: Request to obtain a Purchase Order to procure Screws and plates that are specifically designed to be used on patients that undergo Craniotomy surgery where their skull has been opened to operate on their brain. In order to put the skull back together the screws and plates are needed. Approval of the purchase of the Synthes low profile screws and plates will ensure the Fixation Set that carries these items is complete and the surgeon will have the items they need at the time of surgery. The self-drilling, self-retaining screws with modified cruciform recess facilitate rapid replacement of bone flap. The proposed vendor, Synthes is the vendor of choice that provides the best product for task at hand. The staff is fully trained on how to properly clean and sterilized the instruments and implants in the set. The surgeon is familiar with the product and knows how to properly utilize it. The proposed vendor, Synthes is the current vendor of choice. The items being requested get put inside of an instrument set and sterilized. They are considered Implants. Implants are items that left in the patient during surgery. We currently have three sets with all items needed that work in conjunction of each other. By purchasing these items from another company there will not be compatibility. We would then have to purchase all items that go with that companies set. All vendors will be considered, please provide your interest and past performance to be considered. Authority permitting other than full and open competition (Check as applicable): GSA Federal Supply Schedules or Blanket Purchase Agreement: __ _ FAR 8.405-6(a) (Circle as applicable): The following items needed ed are as follows: 421.525-TI LOW PROFILE NEURO BURR HOLE COVER 12MM DIA 421.511-TI LOW PROFILE NEURO BOX PLATE 14MM X 14MM/4 HOLES 421.516-TI LOW PROFILE NEURO DOUBLE Y-PLATE 6 HOLES 18MM 421.502-TI LOW PROFILE NEURO STRAIGHT PLATE 2 HOLES 421.527-TI LOW PROFILE NEURO BURR HOLE COVER 17MM DIA 421.519-TI LOW PROFILE NEURO ADAPTION PLATE 7 HOLES 04.503.228.05-TI MATRIXMIDFACE SCREW SELF-DRILLING 8MM 400.833-TI LOW PROFILE NEURO SCREW SELF-DRILLING 3MM 400.834-TI LOW PROFILE NEURO SCREW SELF-DRILLING 4MM 400.853-TI LOW PROFILE NEURO SCREW SELF-DRILLING 5MM 400.854-TI LOW PROFILE NEURO EMERGENCY SCREW SELF-TAPPING 4MM 400.855-TI LOW PROFILE NEURO EMERGENCY SCREW SELF-TAPPING 5MM 313.932-LOW PROFILE NEURO SCRWDRVR BLD SLF-RETAIN/CRUCIFORM/MED/HXC 421.533-TI LOW PROF NEURO CONTOUR MESH 100MMX100MM/0.4MM MALLEABLE 421.503-TI LOW PROFILE NEURO STRAIGHT PLATE 2 HOLES/9MM Period of Performance Base Year and To Option Renewels TBD-or Base Year May 1,2020 through April 30.2021 Option Year One May1, 2021 through April 30,2022 Option Year Two May 1,2022 through April 30,2023 This acquisition is being conducted under the authority of the FAR Subpart 13.106-1(b)(1)(i) allowing the Contracting Officer (CO) to solicit from one source. Interested concerns capable of providing the same or similar products or services as described in this notice may submit a capability statement outlining their capabilities. Capability Statements must be received within the time set forth in this synopsis to be considered by the Government. A determination to compete this proposed contract based on responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Each response should include the following Business Information: a. DUNS. b. Company Name, address, POC, Phone and Email address c. Current GSA Schedules or NAICS codes appropriate to this Award. d. Type of Company (i.e., small business, 8(a), woman owned, hubZone, veteran owned, etc.) as validated in System For Award Management (SAM). All offerors must register on the SAM located at http://www.sam.gov/portal/SAM/#1 e. Capability Statement Comments to this announcement may be submitted to the Clinical Center, Office of Purchasing and Contracts, prior to the closing date specified in this announcement, electronically to the attention of India Payne, ipayne@nih.gov or Barbara Taylor, taylorb@cc.nih.gov by the due date and time marked in this notice.